Posts

Chosen Solution unsure exactly what its called, but my 27" display snapped at the internal bracket where the stand mounts to the display. its a clean break where all the screws live. hopefully, the picture will help. https://imgur.com/a/xeg4i9O Apple is trying to quote me $700 to fix but im hoping a less expensive alternative is available. please advise! thanks Sorry for not seeing your post before now. Its a bit of work to get to follow this guide: Apple Thunderbolt Display LCD Replacement once the display is offer its self explanatory taking the old part out....

Chosen Solution I work on iPhone 5 alot but the question has always made me wonder if a ESN is bad does it stay bad or is there a way to change that from a bad ESN to good ESN?. I have built up a rather larger collection of bad ESN boards and would like to make them clean if I can. Not legally that I know of people from another country may buy them

Chosen Solution I recently repaired this phone and just changed the digitizer. Everything is connected properly and there still is not sny picture. I was looking for q replacement LCD for this phone but I cannot find one. Does anyone know where I can find one?? Or how to fix this problem. Model: Kyocera c6750 I have recently ran into this same situation with trying to find an lcd to fit this phone....

Chosen Solution Hi there, I’m kinda pulling my hair out trying to figure out this mess I’ve gotten myself into with my Samsung A40. My phone hit the ground hard by accident and despite no visible cracks, black/purple blobs have started spreading throughout the screen. Worst of all, touch screen functionality has ceased and I’m stuck in the Lock Screen. Rebooting it doesn’t work, which isn’t aided by the fact that the volume buttons don’t work to reboot it in the first place, so I had to run it out of charge to restart it....

Chosen Solution When I power up the Laptop the green light comes on in the from but no screen I hear the fan on the mother drive moving but that’s it. One of the lights on that laptop indicates hard drive activity. Watch that light…does it blink much? On a normally-booting system it should keep blinking for a couple minutes, and that blinking should appear random. If that light never blinks, then the system has a hardware problem, most likely the motherboard....

Chosen Solution Hi Guys, When I switch On my electribe SX screen is blank , empty but lighting.. start and rest of the buttons are off. please help me Chris This is usually a symptom of a blown chip fuse. I have encountered and repaired this issue in multiple ESX’s which had the same symptoms as you described ( LCD and tube backlights light up, but nothing else on the unit works)....

Chosen Solution I have the BLU Vivo XL2 for about 2 years now. About 2 months ago it started shutting down with 62% battery life remaining. I will attempt to do anything on the phone and it flashes the message Shutting down battery low. It starts shutting down then shows battery life at 0%. Now, all of a sudden it is doing that with 98% battery life. This is annoying as I was trying to reply to a text message and as soon as I touch any key it shuts down....

Chosen Solution I have a macbook pro 2011 recently I change the motherboard and replace hard drive with ssd with 8 gb ram. Now the problem is that when I turned on laptop it goes to blue screen after some time and with 4gb ram its fine. I don’t know what’s the problem plz help me. follow this post to reset ram How to reset the SMC, PRAM and NVRAM on a Mac Laptop

Chosen Solution both keyboard and trackpad stopped working after liquid damage after liquid damage. but other functions are working okay for more than one year. touch bar and keyboard light are on, and the power button works. but just cannot input anything from the keyboard and trackpad. Which part of the laptop was possibly damaged from the liquid? You’ll need to replace the uppercase assembly MacBook Pro 13" Retina (Touch Bar, Late 2016-2017) Upper Case Assembly Its a bit of work!...

Chosen Solution Brand new tablet bought tonight will not unlock, it says swipe scream, I do it will not bring up anything to unlock it bearybusy415 , If the device is new and fully charged and will not function properly return to place of purchase for refund/replacement or you could try RCA tablet support link below to contact them. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....

Chosen Solution I have a iphone 6 plus with water damage. After running it through the ultra sonic cleaner I put power to it and it doesn’t draw any power. Found short on C1203 and C1227. Last phone I had with this issue (these caps sorted) turned out to be a problem with the cpu, only difference was cpu would get warm and draw was .5a. Only after removing that did the short clear....

Chosen Solution I keep getting the message “internal storage running out.please free up some space.” But I can’t free up space because the message keeps coming up. Hi @ Lisa Wilson, Can only speculate that as you only have 2% internal storage left available (85MB out of 4000MB - or 4GB) that is the reason for the message. Did you try moving the apps that can be moved to the SD Card, to try and clear some storage space in the internal memory?...

Chosen Solution 2004 mazda 3 horn not working Tracy, first check that all the wires are connected to your horn. Use a multimeter and have someone push the horn button to see if you have power going to the horn. If you do, then it is the horn itself. If not, then check the fuse and/or the horn relay.

Chosen Solution Hi I have a A701A Kenwood Chef, and I am struggling to put the on off switch back. Can’t find a diagram and also to set the calibration right. Can you please assist me please? Thanks Stefan Jordaan Hi, Here’s the service manual for the mixer that may help.

Chosen Solution I just fixed a Sony Xperia Z and after a little while the adhesive does not want to hold the screen in some places. Do i need to buy a better adhesive? This seems to be a big issue with S5’s and Sony Experia’s. Best thing to do is to make sure you thoroughly clean frame, apply a plastic adhesive activator and use high quality adhesive’s. Also you need to check your frame/chassis for damage, separation, and or whether or not its bent....

Chosen Solution So I’ve got this customers iPad Air 2 here. He brought it in and said that it just keeps restarting. He said he took it to apple a couple of years ago and they told him the issue but he doesn’t remember what they wanted to replace. So my colleague suggests changing the battery, this fixes nothing. The iPad will sometimes come on if you hold down the power and home button , and will always come on as soon as it’s plugged into the wall or a laptop....

Chosen Solution The lower left screen got a hole/cracked - only 15 % of the screen area is effected with left 20% of screen area with lines . Does it need a complete screen replacement or the crack can be fixed . Also, let me know total cost of repair What model specifically? I think there are 21 MacBook Pro models that match the A1398 model number, you may wish to lookup yours by EMC Number, Model ID, or Serial Number for greater precision....

Chosen Solution Hi everyone! I have used my phone since 2014 (maybe, since 2013). I never ever had any problems with it. And in the case I had, I just updated the firmware. But now I face some problems. It overheating all the time. For instance, I write a text with a simple app (I write essays for money), and in a few minutes, it gets overheated. All other applications are closed (and almost nothing works in a background mod)....

Chosen Solution In replacing my fan, I believe I may have damaged the battery flex cable. I pulled the flex cable out without lifting the seat, and then was able to place back without issue. However, now the computer will only turn on with power cable. If it boots up and I remove the power cable, it immediately dies. With the flex cable reseated, It does recognize the battery, says it’s at 100% and hardware test shows no issues....

Chosen Solution Is there a way to replace a bent bluetooth antenna connector for the 20" early 2008 iMac? When I replaced the video card on my early 2008 20 inch iMac the bluetooth antenna was bent/damaged when I removed it from the bluetooth card. I’ve tried to bend it back into shape, but the connector was too damaged to fit back onto the bluetooth board. I didn’t see an Ifixit instruction to fix or replace the u....