Posts

Chosen Solution As stated in the title, when I replaced the screen, altough i did bend two things (shown in image below): I rebend them, put everything together and it seemed fine at first, but as soon as I started to “smudge” the screen to see if it fit and wasnt lose, the screen went black. The apple logo appears and im back at the home screen.Then I tried shaking it around to see if I could replicate the problem, and sure enough after some shaking it rebooted again....

Chosen Solution My 04 wrangler seems stuck in 2nd gear. Fluid is full. How do I clear the fault and get back to regular operation? Solinoid pack in the transmission ,common fault its a complete pack ,go onto YouTube check it out !

Chosen Solution Check tire system light keeps coming on and all the tires have correct tire pressure. How do I fix and reset the light on the dash and overhead console. Could be the spare or on a vehicle that age (if it has a full size spare) or the sending unit in a tire. I would think that a Chrysler shop has the equipment to know if the units are bad… however AFAIK the tires have to come off the rim for them to tell....

Chosen Solution Was having problems with misfires I replaced the spark plugs and all the coils and cleaned the throttle body now I’m in Failsafe mode it’s got 7 codes now cam sensor both sides ,mass air , o2 sensor both sides upper , throttle what do I do now What spark plugs did you use? Brand and model?

Chosen Solution Hello everybody. I recently opened up my 2019 21.5” iMac and put a SSD in it using the iFixit replacement adhesive kit. All went well, but today, about a week after the work, I was at my desk and the screen separated from the adhesive. It fell a couple of inches, but everything looks to have survived. Currently it’s reassembled and laying flat to let the adhesive reengage. I’m ordering a second kit to replace it with fresh adhesive strips, but I’m concerned now about longevity and the future....

Chosen Solution Hello! As the title says, my MacBook Pro is unable to read the RAM, and this is the third time it has happened. Each time I got the error (three beeps/sleep light blinking thrice), I had moved my Mac from one place to another (moving rooms, etc). I got the RAM upgraded after the first time and got it fixed again (took it put and put it back in) after the second....

Chosen Solution Hi guys, I thought there’s nothing you can’t get in the Big Apple but it seems that a lab that fixes Xiaomi is hard to find. Any tips or ideas? My screen went dark and unresponsive even though I know the phone is on. Thanks! Hi @anatk , Try contacting Xiaomi USA to see if they can help you at all.

Chosen Solution Without floppy disk drive connected,computer powers up,no beep,and it seems ok, I did a system test,on the screen appeared system ok.I connected the floppy drive while machine was on and the floppy started spinning,reads the disk. When floppy disk drive is connected to the controller card and I try to power up the system,nothing happens,not even power up light is on.Thank you in advance!

Chosen Solution My apple watch isn’t charging and when it say’s it’s charging, it isn’t and stops some time later. My watch gets very warm to the touch when this happens. Is it my battery or something else? I’ve tried different chargers, hard rebooting, and wiping it completely. Yes I be changing the battery

Chosen Solution I recently broke my Note 10 5G and can’t find a screen assembly that says Samsung Note 10 Plus 5g only Note 10 plus. I wonder if I can replace the Note 10 plus 5g with the note 10 plus screen assembly Yes, they are the same. It appears they are on MobileSentrix

Chosen Solution my asus gtx 970 recently started to be in max clock and memory when idle. the temps are around 60-70C and when the fan is at a100% its on the high 50s. the power is on adaptive and shadowplay in off, also scanned for maleware and its clean. pc specs: i7-4770 gtx 970 12gb ram z87-a windows 10 update: just noticed that after sometime it returnes to normal core clock and memory and the temps are around 40C....

Chosen Solution I ordered and installed a new battery for my 5s–it is certainly better than the old one, but not as good as new, and the phone still shuts off prematurely when battery life is below 20%. I wiped the phone and didn’t restore the backup, reinstalling data and apps, and it didn’t help. Is there some power management I need to reset? Bad batteries are commonplace, so you could try that since they are inexpensive....

Chosen Solution My LG Q60 was dropped in water, dried off, and works fine, but the battery usage symbol in the upper righthand corner has a flashing arrow on it. At first my phone wouldn’t charge, but I removed the sim card and re-inserted it, and it’s charging now, but that little arrow on the battery usage symbol is flashing like crazy. I’ve heard it’s something with the charging port…any ideas how I can fix this?...

Chosen Solution So i recently dropped my 2DS, i picked it back up and tried turning it on. It turned on, i know that because the blue light goes on, but then the screens stay off, then after a few seconds the device turns back off. Also while it turns off u faintly hear the speaker make a noise and then it turns off ,just like the device itself. Hi! Is the console rattling if you shake it a little (that would indicate that a component broke off the main board)?...

Chosen Solution Yesterday I had to remove the back lid of the screen to Unplug the Power cable from the inside. After putting all the pieces back together (screws and lid)I noticed that a black vertical stripe roughly 3cm large has appeared on the right-hand side section of the screen. Today I opened the posterior lid one more time to check whether the connections were fine and they appear to be properly plugged in without any damage....

Chosen Solution Hi, I have a Samsung led TV with black vertical strip problem.. It’s about 3 inches. Not sure can that be repaired/replaced. What could be the reasons of this? Experts pointers please. TV is KU6300 6-Series. Update (10/29/2017) @preetesh could be a TAB error as well as a panel or T-con error. You will have to unplug your set and remove the back. then take a look (don’t touch) at the ribbon cables entering the LCD panel on top of the panel....

Chosen Solution 10:00 pm. My Google Pixel 2 XL was hosed under a tap for about five seconds. Water drops can be seen on front and rear camera. 10:10 pm. Boot loop. 11:00 pm. Boots normally. Touch screen no response. 11:30 pm. Everything except camera (blurry image) works fine. The next day. 8:00 am. Bright, discrete horizontal lines appeared on the left side of the screen. Dark colours (like black) can still be seen but anything brighter than grey will be saturated to white....

Chosen Solution i dont have the charger for the tablet and was wondering if somehow i can still get it charged ? @jknite0218 get a proper replacement charger. Anything else will eventually fail or worse, ruining your tablet. Replacements can be found for ~$20USD at places like ebay amazon etc. @jknite0218 No, sadly. Without the charger you are kind of dead in the water. I provided you a link to a replacement charger for your Surface on eBay....

Chosen Solution Is that possible to replace the screen when the model is just refurbished ? Hi, I bought a Note 7 display in Ebay, and I install it. It works perfectly. Yes to my knowledge. Samsung recycled parts from the Note 7 to use for the Note FE. My note fe screen has just got broken .. are you sure i can replace it with a note 7 screen?...

Chosen Solution Screen flickers and has vertical lines on right side of display. Problem started out small and intermittent for two days and suddenly got worse today. Display issue does not show up on external monitor. I have already tried software fixes like resetting PRAM so problem is most likely hardware. Out of warranty and don’t want to get overcharged at local apple certified repair shop, hoping to get a clue to what the problem is before taking it in....