Chosen Solution Hi Everyone My iphone X was restarting after it had finished downloading IOS 13. I was running out of charge during the process, now, the phone restarted, the apple logo appeared with the progress bar moving for about 10 mm then it restarts and does the same thing over and over. I believe the upgrade was interrupted when the phone’s battery ran out, but I’ve replaced the battery and still got the same....
Chosen Solution I’m trying to find good troubleshooting information for my DSC H300 because for some reason Zoom function doesn’t work. Does anyone know of a common problem and/or fix or is this something that will need something replaced for it to zoom again? Hi Carol If you are 100% sure that batteries are of good quality and fully charged, and correctly placed; The battery contacts are not corroded or dirty; Resetting your device is the first and best option: MENU—> (Settings) —> (Main Settings) —>[Initialize] —> [OK] With this setting you can reset all settings to the default settings....
Chosen Solution Why my ceilling fan (Brand: Midea 5 Blades) keep auto OFF everytime I ON . There could be several possible reasons why your device or appliance is turning off every time you try to turn it on using an IR remote. Here are a few things you might try to troubleshoot the issue: Check the batteries: If the batteries in the IR remote are low or dead, the remote may not function properly....
Chosen Solution Hello, My laptop DELL inspiron 14 7470 shuts down every 30 minutes exactly. I have already tried to repair it a another company but they said they need to replace the motherboard but couldn’t find the spare parts in Singapore. This is the message they wrote: “PCB related problem. Was previously replaced 1/0 chip bust still same issue. Possible internal PCB layer. Through hole connection adapter sets hot then PCD has result Thermal expansion that results to lose contact on internal layers” After that I made a troubleshoort with DELL and they said the motherboard needs to be replaced but it is out of stock in Singapore and needs 6 weeks for delivery....
Chosen Solution I have iMac 27” late 2013 model. My backlight stopped working and display works just fine. Replacing the display at Apple shop will cost me around $1000. I’m trying to find the solution just to fix backlight since screen is working perfectly, without a scratch on it. I had a friend look at it (he fixes Macs) and he told me that LEDs in backlight strip stopped working. Can I buy that strip from somewhere?...
Chosen Solution The backlight to my macbook display isn’t lighting up. I know I get video, because if I hold up a flashlight against the Apple logo on the back of the display I can see my login screen in the front. I was thinking it could be the backlight fuse, but I dont know where its located on the logic board? Hello Jstervil, It may very well be the backlight filter....
Chosen Solution my car is able to drive. I have no power steering and the wheels are difficult to turn. The indicator light say the battery is not charging. What is causing this @expofrosty double check your belts. Since you have no power steering and your “Battery not charging” could be a sign of a broken alternator belt. If the belt is okay you will have to consider to get your alternator checked (try places like Autozone or your dealer) with a worst case scenario of replacing your alternator....
Chosen Solution So I’m having some issues with my MacBook battery…..It’s stuck at 0% and won’t charge at all. As soon as the charger is unplugged my Mac shuts off. It’s also running slow at times mainly start up. Anyways I was checking my battery information or whatever under system information…and this is what it reads me….can anyone tell me if this is good or bad? I mean obviously it’s not good…but can you tell me what it may mean?...
Chosen Solution My note 8 screen suddenly stopped working, no drops or known damage of any kind. Just a totally black screen but everything else seems to work, light blinks, it rings when you call, everything. A repair shop that was planning to replace the screen said the screen is ok but the screen power chip is bad. Does anyone know of this is on the logic board or daughterboard? Also, if i replace the logic board, will i lose my data?...
Chosen Solution I have a craftsman zero turn mower model number 247204111 that blows 30 amp fuse while trying to crank engine. I’ve traced entire wire harness and found no frail wires other than connector to electric clutch. Repaired connector and still doesn’t crank. I’ve also replaced battery, new ignition switch, and starter solenoid. Could electric clutch be bad and blow fuse? Need help thanks Does engine turn at all when you engage the starter?...
Chosen Solution I have a 75-300 mm lens and the tip at the end where the filter attaches is broken. It appears that there are screws to remove the tip. I s that tip replaceable? What is it called? Where do I order it? bradysdad8 That part may be replaceable, labled here as the filter thread and may be replaceable on some lenses. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....
Chosen Solution In my samsung chromebook I took apart (to fix), I have a burnt chip, but I can’t figure out what it is. Can anyone help? (Its the large white chip on the side of the main board with the processor) That looks to match this chip. It is the mainboard of the chromebook. This part contains all of the shielding inside of the device that you would need. Chromebook Parts: http://www....
Chosen Solution i recently got an Oculus Quest 2 second hand, and the controllers came in with messed up sensors. i do not have the money to buy new controllers, so i would like to know if it would be worth it to save up, get them fixed, or to see what i can do. already tried taking alcohol to the exterior, no luck. They just came out with a firmware update for the controllers yesterday (ish) to fix this Just turn on your headset with the controllers paired and it should automatically update the firmware on them....
Chosen Solution The cable to engage the blade is loose and can be pulled by hand inside housing These can be replaced with just a few common tools. They are similar to the break cables on a bike. This is actually a break cable except is is engaged when not pulled, but when you pull it it will allow the motor/blade to turn. Your local Toro dealer (or wherever you purchased the mower) should be able to supply you with one and assist you with information on the repair, because this happens frequently....
Chosen Solution When I try to take a picture it comes out all blurry. Jake, You might need to clean the lens, if this does not work check for debris inside the lens. Follow the manual to open the device and clean the camera if debris is present. Zach
Chosen Solution Hello, After following Tyler Koski’s excellent dismantling guide in order to replace a broken screen and clean a gritty lens (fell off the Kilimanjaro, literally) and reassembling the whole thing, I found that my camera no longer turns on (it worked before, albeit the LCD was broken and the images dirty). I tried : Using the “Power On” and “View pictures” buttons (all buttons click correctly, but no results)Checking if my battery is charged (it is)Re-dissassembled it, checking for any damage to any component or connector (nothing visible)Reassembled it, wiping each connector with a clean cloth and blowing compressed air in/on any connector and component as I went....
Chosen Solution hi, I have a problem with my Nikon D7000. When I turn on the camera, the eye piece view becomes dim. If I take off the lens, I can see the eyeview become bright but when I install the lens the eyeview becomes dim. I need use high ISO and low shutter speedS to get the correct exposure. But, the ISO that is suitable more than 6400! so what is the problem with my camera and how to fix it....
Chosen Solution My son stepped on my IPad 12.9 - 3 when it was face down and in it’s case. The screen isn’t broken but the dent in the back in making 1 inch of the screen black. If I open it up can I somehow bend the dent out and if I did, will that fix the screen issue it is causing? Update (05/06/2020) Thanks so much Jesse. It’s not causing a black spot but rather a black line across the screen....
Chosen Solution Background story: Last year I bought a used Macbook pro MGXA2LL/A . The fans have been very loud since the beginning, spinning often and the computer was overheating. I promised I would open it and clean it but stupidly enough I postponed it. The other day while streaming a movie I saw a spark in the area between screen and main body of the computer, on the left side, and with a loud noise and smoke the mac stopped working....
Chosen Solution I dropped my phone and busted the screen. I have another phone someone gave me to try and take the screen out of to fix mine. But can I just swap the motherboards or something else to get the other phone working with my data? as long as they are the same model number and service carrier you shouldnt have a problem Service carrier is either with the mother mainboard (topmost) Sprint (CDMA) or it follows the SIM card with phones (GSM) that use SIM cards like Verizon, AT&T etc....
