Posts

Chosen Solution Hi Guys, I’m trying to fix my broken t100ha. I want to disarm for changing LCD and touchscreen. Do you have a guide for do it?. I’m trying myself but I can’t. Thanks in advance. what youtube guide here https://www.youtube.com/watch?v=IBo8Qwfm… hi franpaki did you have found some videos or picture to change only the touchscrean? i in same situation and i found somme module touchescrean only but i not shur its working if the lcd have glue to the touchscrean....

Chosen Solution aux in is broken ,how can it be fixed ? do i need some Accessories @boseman take a look at this guide. Step 6 shows the port soldered onto the board. So it would not be easy. You could try and purchase a broken Bose SoundLink Color and harvest the port from it. Or you could possibly pigtail a separate input port (cable) to it. This will depend on your soldering skills etc....

Chosen Solution Display was broken and I’ve removed it. After I took new one and attached it, but the main ribbon (from display board to pcb board) was damaged. I’ve bought new and replace, but now backlight doesn’t work. Service man told, that problem may be in short circuit (when damaged ribbon touched metal tilting mechanism) and backlight is controlled by the BGA 8072PN (upper left corner of photo). But on the forum I’ve read that backlight is controlled by another chip....

Chosen Solution My door to the battery compartment no longer latches. So, the connection is not made and the camera can’t turn on, unless I manually hold the door closed. Pretty tricky way to take a photo : p

Chosen Solution I have recently buied a new phone Samsung j2 but the battery is not lasting so why and what’s the problem? ?? Did you buy the phone brand new or not, could be various reasons on why the battery is not lasting. Battery dead. Charging ic, meaning the battery is not charging correctly. Battery nahi chal raha hai

Chosen Solution My brother installed a battery from ifixit a little over a year ago in my MacBook air. Its been working fine for the past year but recently been holding less charge. The battery is now only lasting a few hours for each charge and says service battery. It only has 361 cycles on it and I only charge when it 2%. I really don’t have the money for a new battery is there any way to fix it....

Chosen Solution Ok so I replaced a broken screen but in the process I broke the home button ribbon and so I changed it as well now that everything is done and put together nothing turns on and all I get is a boing noise every 5 seconds when eric, “boing noise every 5 seconds " is usually a sign of the display not responding/not found when the phone does its self check routine....

Chosen Solution I have Beats By Dre PRO with broken headband and right earcup is dislocated from the band Where to repair if it can be done and what would be the pricing of repair? @unclesam the only way to repair those, would be by replacing the broken item from a donor model. Try places like ebay.com or similar and purchase one that is broken on other places as yours.

Chosen Solution My puppy somehow for some reason got hold of my Beats by Dre headphones. Probably thought it was a play toy, which kind of still makes it difficult to explain as to how he got a hold of it. My cushions are all teared/ badly damaged. Headphones still work, but just the cushions damaged. Is it possible to replace? If so, please advise of any legit/ authorized repair company in the Western Cape, South Africa....

Chosen Solution I’ve broken my iPhone 7 home button and I need to replace it. I know a after market home button won’t allow the Touch ID to work so would it be possible if I brought a legit iPhone 7 of eBay and use the home button from that in my own iPhone 7 and would it allow me to use Touch ID ? The only replacement buttons that work on the 7 are those aftermarket home buttons they are called JC Home button (V2)....

Chosen Solution Caller can not hear me unless I use speaker phone Hi, Try using the earphones with the microphone attachment to make and receive calls to verify that you can be heard OK. If you can be heard OK then there is a problem with the phone’s internal microphone. It is either faulty, has come loose from the systemboard or perhaps the voice inlet hole has become blocked. To check out this last possibility, use a strong light and a magnifying glass to inspect the phone’s voice inlet hole....

Chosen Solution As soon as I put my GPU in I’m getting only 1 led light on. If I remove the GPU two led lights are on. I tried two different GPU cards and the same things happened. With the external monitor plugged in I’m getting the 3 leds on. So strange. Did anyone experience similar things. Thanks in advance. SME? I opened the iMac to see what’s wrong and therefore i removed and changed the graphic card....

Chosen Solution Hello Everyone I got an iphone 11 which came with no bluetooth and wifi. So I have reballed the layers the bluetooth and wifi was back but lost the imei so reballed the baseband ic. But it was still same so reballed bbpmu too. But now when I try to restore it, it gives me an error -1 on 95% of restore. Same on 3utools and itunes. But on 3 utools I got an error message as: Error code: -1 Code explanation: AMRestorePerformRestoreModeRestoreWithError failed with error: -1 Anyone any idea?...

Chosen Solution So I have an Iphone 5s with a weird problem. Symptom 1: needing to put in my password after restart. but I hadn’t restarted it and it had battery left. I decided this was random and ignored it for a while. Symptom 2: turns off randomly. Not too hot, not low battery, just suddenly off. Symptom 3: Turns off randomly and wont restart even with holding the home and power button for a long time....

Chosen Solution 6 beep problem when I try to open. Dell Inspiron 3542 Hi, A 6 beep error code is a video subsystem failure on the motherboard. Here’s a solution that might work, but maybe not, you can only try. If not you will need the schematics for the motherboard to find out what’s happened or you have to replace the motherboard. Here’s the owner manual for the laptop, from this Dell support webpage for the laptop which may help as it shows how to access the motherboard etc....

Chosen Solution I bought some Crucial DDR3L 1866 GHz 8 GB RAM modules for my MacBook Pro mid 2012 13” (non-retina) by mistake instead of a 1600 MHz. Can I use it any ways? Apple systems are very picky about memory. You can install faster then factory RAM in many cases, but non Mac certified memory is sometimes more prone to crashing. It should work, but I’m going to make that recommendation with the caution the system may not be stable since it probably isn’t Mac certified....

Chosen Solution Hey guys so basically i broke my noname 9" tablet (IGET SMART S90). Both lcd screen and digitizer were broken. So i first searched for lcd screen because i couldnt say if the digitizer is working if i cant see anything. So i found 9" lcd screen replacement on ebay it was not for my exact device but i couldnt find replacement for my exact device. So i bought it....

Chosen Solution Hi, I’ve replaced the screen and the battery of an iPhone 5C using iFixit parts and the audio jack connector stopped working after reassembly and the phone stopped charging. The screen color looked a bit odd (whitepoint seemed a bit blue) but I wasn’t suspecting anything wrong since there were no colors missing or black bars across it. Now it turns out touch input is a bit flaky. Should I return the screen?...

Chosen Solution Hi guys i have a samsung ua40d6000sr, my backlight comes on but keep going on and off, when i disconnect the main board ribbon it stays on. I know nothing about voltages or testing. any ideas what i should look at, the capacitors seem fine on psu board ?? your symptoms might indicate the problem is in the main board or tuner, but you can’t rule out the PSU....

Chosen Solution How to fix this issue after replacing the battery the battery gauge stuck on 100% and has message about battery warning As far as the battery warning message there isn’t anything you can do. And what do you mean gas gauge is stuck at 100%? Does it stay at 100% no matter what?