Posts

Chosen Solution Have a previously functioning Brother HL-L2360DW printer that after plugging into outlet and pressing on button only wifi button is immediately lit, there is no mechanical cycling noise, no characters in LCD display—wifi light does not go off when button pressed, does not power off when power button pressed, none of the other buttons do anything. When unit unplugged then plugged in again, wifi light remains off until power button is depressed....

Chosen Solution The 1/4 th part of my i pad is working great but the remaining 3/4 is having small gey lines and some flikering . the screen is not broken at all Should i have to replace my screen or is this because the components are not intact. Can anyone please suggest the best way in which I can repair it. Please help ! [http://|https://drive.google.com/file/d/0B8nrv2Q…] [http://|https://drive.google.com/file/d/0B8nrv2Q…] Look like a bad connection, but if you have never replaced the screen there should be no reason it is not seated right....

Chosen Solution Hi! I have bought a nintendo switch with broken TV output. I was hoping it might be the dock, but the dock is fine. I have also tried different dock and still nothing. I also tried all the tips on the internet, cleaned everything, yada yada and it is probably a hardware issue. The USB port on switch also looks fine with all pins intact I have looked at the USB-C part of the motherboard with descriptions what is what but I am not really sure what can I do at home to narrow the issue....

Chosen Solution I have an iphone 8 with a replaced screen and LCD, I have accidentally ripped the ribbon cable for the proximity sensor and camera, I put the screen and LCD on the phone and tried turning it on, the phone does turn on but the screen will not turn on. Is it because I put it back together without the proximity sensor? The phone will boot just fine without the proximity sensor....

Chosen Solution Hi, So I know this is an old phone and not alot of support is longer provided. I was just wondering whether there is a way to change language on the phone? To a language that is not available through the phone’s menu that is - i.e. it is not installed. Kind regards Yes you can it is in the settings.

Chosen Solution I was wondering if I can still get the music off my iPod. All that’s left of the iPod is the logic board and battery. I’ve had it plugged into my computer but nothing has came up. Someone told me I probably have to reconnect the display and click wheel for it to work. I took it apart to replace the battery and accidentally tore the ribbon that connects to the click wheel so idk....

Chosen Solution I was trying to get the iCloud icon back o. My phone and thought this might work. Not only didn’t it work, but it arranged all my icons, not just the home screen Hello, if i were on your spot i would save all my files i need/want and reset the phone to factory settings. If the I cloud is on the IOS installed from start this should work for that and all icons will be at their original position....

Chosen Solution Dear all, My iPhone 6s Plus’s wifi and bluetooth antenna is too weak to receive wifi and bluetooth signal. I have extra broken 6s lying around. Can I use the antenna from 6s on 6s Plus? do they match? if not which one do I have to buy to get strong signal on both wifi and bluetooth? Thanks in advance No it’s physically different in size. And the antennas are only a couple of dollars each....

Chosen Solution 誤って、落下させてしまい、画面が割れ、タップしても全く反応しないのですが、どうすれば治りますか？ちなみに、電源ボタンはつきます。 Google Translate: What should I do to crack the liquid crystal? I accidentally dropped it, the screen cracked, and when I tapped it, it didn’t respond at all. How can I fix it? By the way, the power button is attached. You can replace the whole display unit

Chosen Solution My 2017 13” Macbook Pro battery is acting weird for last couple of months. I bought it last year on February. Most of the time I connect it with an external monitor while closing down the lid. This requires me to keep my power cable attached all the time. I used to let the battery drain at least once a week, but other time i kept the power cable plugged....

Chosen Solution My TV screen has what I’d call black snow on it with dark spots. The dark spots recede away to the edge of the display after the TV has been on for a little bit, but the black snow remains and the picture is washed out. I already replace the Y-Main and upper and lower buffers. Any idea what could be causing this. This is a display related hard calibration issue....

Chosen Solution Hi - So I replaced my aging iPhone6 battery with an iFixit battery replacement kit. Followed each instruction meticulously. Took me about 90 minutes. With the new battery installed, the phone had approximately 50% battery life. From here I continued to follow instructions to use the phone until it was below 10% before a full charge to calibrate battery - no issues. The next day I thought I would test to see how well this new battery performed....

Chosen Solution After replacing my iPhone 7 screen, if you hold in hand and use it, it works fine—but if you are not touching your other hand to the phone body, then digitizer doesn’t work. It works when plugged in for charging though. It seems like some kind of grounding issue. I have tried 3 new screens and same issue. Please advise. Thanks! I’ve had a similar problem like this before....

Chosen Solution The photos have strange marks and are all one colour. The previous pack didn’t do this so maybe its just for the pack and not the camera? What you are seeing are chemical changes in the film by temperature or how it was stored, but it also appears to look as though the film was expired. Your camera should be fine though. I had the same problem, then i cleaned the roller....

Chosen Solution My hard drive quit and I need complete set of drivers so I can install Windows 8.1 on a new hard drive. I downloaded Windows 8.1 from Microsoft to a bootable USB drive, but it will not install without the Asus drivers. You can download the drivers for your model from Asus website. Here is a link to the drivers. http://www.asus.com/support/Download/3/4… Firstly, you can try to download and intall drivers from Asus websites....

Chosen Solution Hi what’s the best way to find out what screws fit the back panel of this laptop? It works, would only need service manual to find screw type and length. Thanks, Brian Sorry don’t know the exact answer but they may be 2mm and 2.5mm metric screws of varying lengths. Just buy a lit - you know a lidded plastic box with dividers with different sizes in each compartment and see which ones fit....

Chosen Solution I purchased the battery replacement kit. I followed the steps to heat up the phone so the cover will lift. I used the iOpener and that didn’t work. I tried my heat gun and that didn’t work either. I even out of desperation used a sharp exato knife to see if I could get a slight movement but only cracked the cover. Help, why won’t the case let go like all the YouTube videos show ....

Chosen Solution Hi I have recently changed the LCD screen on a iPhone 6 exactly the same as I have done in the past . The problem I am having is that sometimes when touching the screen or typing a message etc the screen goes very dim and then comes back brighter when not touching the screen . I have checked all connectors and everything looks fine and the phone has been fine for 2 weeks and has just started doing this ....

Chosen Solution I can tell that it won’t turn on for this reason. If I plug it in, the screen is still on, and it turns on when I get a notification. I’ve made this work for a bit by extending the time the screen is on but this massively drains my battery. How would I fix this? It seems petty to take into a phone repair place. Did your phone get hit or dropped?...

Chosen Solution I have a iPhone 3GS that won’t power on, I have it all torn apart and have the battery out. How can I test the battery with a multimeter to make sure it has a charge. Also I hear there is a way to use exposed wires on a usb wire to charge the battery? The outer two contacts are the main battery contacts - you should read about 3....