Posts

Chosen Solution Since im reading so many topics about problems with replaced batterys and after iOS 11.3 made the whole thing clear for me, I decided to open this thread and light up your issues! It all started with the replacement of my iPhone 6’s original battery; I got the feeling, that the new one I bought from iFixit drains faster than my original one back in the old days. I also got the issue that whenever my iPhone is out of battery and I’m trying to restart it, it falls into a bootloop instead of showing me the battery or “charge-me”-icon....

Chosen Solution when the air cond. is on,the vent will get wet and sometimes i smell and detect steam from under the hood. not always but often. when this happens i smell anti freeze.? The heater core is most likely bad

Chosen Solution My Macbook Pro recently started showing these lines on the display. If I use an external monitor it does not show up, and seemingly shows up only after long periods of not being used. The issue goes away if you close and open the laptop repeatedly. Sometimes it takes longer than others but it eventually goes away. This appears to be a connection issue. Where would I start to diagnose this issue?...

Chosen Solution The parts being like the front facing camera? Or the rear facing camera? or the speakers? I broke my screen and want to do a little more while im in there. (Doing a housing replacement too. Also anyone ever added wireless charging to an iphone? Just get a broken 6 plus from eBay or something, the 6S plus is a newer revision of what looks like the same phone, but in fact it is TOTALY different ....

Chosen Solution Hello I have a 2016 m5 12" macbook. Purchased a new USB C port from here, replaced, and still not working. The old USB C was really bad, dinged up, had some black goop on it, covering the connecting rods. Anyway, still not working. I tried to d/c battery and plug in, and check the white LED on the logic board, and that is not going off. Any suggestions?...

Chosen Solution I am about to replace the back glass screen on my iPhone 10SX max. I am wondering what kind of glue/ adhesive I need to use? Hi Daniel, It does not appear that we have the Rear Panel Adhesive Assembly available on iFixit. However, you could probably use Tesa Tape as a wonderful alternative: click. I’m sure there will be other advice from others later on. :)

Chosen Solution I bought a replacement battery but have not yet installed it. Since then my right speaker is failing, with very fuzzy sound. My question is: If I were to replace the speakers as well as the battery, during the same operation, what should the sequence be? Battery, then speakers? Thanks! mmm… The logic board needs to be removed to replace either! So I would follow this guide: MacBook Pro 15" Retina Display Late 2013 Battery Replacement and then after the battery is removed jump to this guide MacBook Pro 15" Retina Display Late 2013 Speakers Replacement jumping down to Step33 to replace the right speaker....

Chosen Solution I have a Garmin 50LM. When typing the name of a state, example, I’ll type “M”, all states with an M appear except Michigan. Same thing with the letter C, California doesn’t appear. This has happened to 2 Garmin GPS. It sounds like not all the maps downloaded. I would say put in a micro SD card into the GPS (8gb is more than enough). Connect that GPS device into a computer that has “Garmin Express” installed....

Chosen Solution Okay, for starters I could not find the model I have from the options… Asus Gaming Laptop GL551J is the model… But anyways, Iv been having battery issues for a few months now. And they were resolved, but now my battery LED is orange and not green when charging. It says it is charging but if it is, why is it orange and not green if it is charging?...

Chosen Solution I installed an ssd on my laptop a while ago it was booting fine but after some time i noticed lag in my laptop even though it still was booting very fast when i went to check bios it is showing window boot loader and using hdd not my ssd Hmmm this is odd. Run your antivirus software for a full scan and see if that nicks the problem....

Chosen Solution Halo, I have a KDL-40w600b the picture is fine but there is blue wide lines from top to bottom appearing on the picture. BILGRAM KWENDO just checked the boards and they are not compatible. The KDL-48R470B main board is not compatible with the KDL-40R470B. Update (09/03/2018) @billyshack since you changed your question, the very first thing you want to do is to post some pictures of what your screen shows....

Chosen Solution I have a cheap Polaroid 49GSR4100KL 49" 4K LED TV. We bought about a little over a year ago. The screen is blue with the audio (sound) still working. We can change channels, but just a blue screen. Any help? @johnhelp a blue screen without anything showing is usually related to a bad main board. Like @jayeff already requested, let us know what you have tried. that way we can at least further attempt to help you repair your TV....

Chosen Solution Hello, Does some one know if the bottom left speaker/(microphone?) is fixable? Since a month when i call people they hear me verry silent, like i am far away from the microphone. This is with normal calls and calls on whatsapp. Even when i put myself on speaker it does not work. When i check ifixit i only see the replacement for the bottom right speaker. I have been to an apple store and they tested my phone, the diagnostic said that there is a problem with thebottom left speaker....

Chosen Solution Just recently, my Barista does not produce hot water out of the brew head. When I turn the machine on (cold), the ready light comes on immediately and stays on. I can still pour a shot by using the steam button first. The pump is clean and works perfectly through both the brew head and steam wand. The steamer works fine as well. I believe this to be an electrical problem, but what part?...

Chosen Solution I was playing games when my tablet suddenly blacks out. It happened before but I fixed it back a few months ago when I searched for a solution on youtube. So I tried doing it again. But this time, I was being such a klutz and basically broke the locking tab on the lcd cable. It’s not like it’s not intact but a piece suddenly fell of the locking tab and I think I also broke a gold pin so I’m here panicking if it can still be repaired or not....

Chosen Solution We have had 2 separate Brother MFC-L6700DW machines that both print nicely, but the copies are light, and when copying blue ink it’s often unreadable. If I manually increase the contrast and density, the copies are fine, but this is a huge hassle to do every time and we shouldn’t need to do so. Also, there does not seem to be a way to make increased contrast and density the default settings....

Chosen Solution Alright, my N3DSXL is BSoDing still. I have taken out the battery and the sd card and left it for a while and then tried again but it still BSoD’d. I also took it apart and cleaned all the ribbon cables with 70% Alcohol along with making sure everything was plugged back in. But it still doesnt post. Both displays work because I can go into the update menu and everything works, but it just doesnt boot....

Chosen Solution I mounted the new original display (with frame), but the camera stopped working. I don’t think it’s a software problem because it was working before. I have already tried unplugging the components and cables, and cleaning them with a little isopropyl alcohol, but it still does not work.Any advice? (Attached is the video showing the problem and some photos on how I mounted the phone) https://drive.google.com/drive/folders/1… Hi Gavino, In this case I would go back to the beginning and start over; meaning I would put the old screen back in (assuming it’s still functional, just cracked) and see if the problem is still there....

Chosen Solution The rubber linning of my rain jacket is peeling around the neck and shoulders. Can it be fixed? Check first to see if the product is covered under a warranty. High performance products often are. TLDR Probably not cost effective to repair otherwise. . . The water shedding, “breathable“ membrane starts to de-laminate due to a combination of UV exposure and evaporated body oils. You might be able to remove the membrane but then restore with what exactly?...

Chosen Solution One side of the tv looks darker, anyone knows whats the cause of this? Tv works, the only issue is the darker side. @franzdaft this could be an issue with your LVDS cables as well as issues with your T-con board or your main board (number one suspect). Remove the back of your TV and check all of those. Post some pictures of your boards etc. with your question....