Chosen Solution Hi, unfortunately while changing the battery of my watch, I destroyed the bridge of the adhesive (with copper underneath) between the middle “island” and the right “island”. It should be connected like the left “island”. Hope someone understands and sees what I mean. Please see my photo. Now, with the new battery, I cannot start the watch. The Apple symbol pops up for a few seconds, but nothing happens....
Chosen Solution screen will not turn on after I replaced the battery. I’m not surprised since this is my first time opening a phone. I know its on because the led turns on (the one on the top not the screen led). it would be nice not having to replace anything else. Check the flex cable for the lcd.
Chosen Solution A while back (in the range of 1-2.5 years) my PS4 got hit with an overheating issue, where it overheated and shut down within a minute of turning on. I wasn’t really motivated to fix it at the time. I let it gather dust on a shelf, but a few days ago I replaced the thermal paste to see if that’d fix it. It turned on, but failed to produce a display....
Chosen Solution I have a PS4 in that I want to check and see if his fan is working, Came in with the fan connector dry rotted and busted up. I was wondering if you guys know what this connector type is called, or possibly where I can purchase one? The new fan came in with a bigger JST connector, even tho it said it was the same model It’s Three Pin Fan Connector for PS4....
Chosen Solution Apple have told me there is no longer any soft ware for my classic I pop I can not sync with I tunes on my Mac. It will not sync with a windows 7 lab top. Is there any soft ware available ? @ipodclassic2017 I am really not sure exactly what you are asking. If you are referring to the firmware, you can most certainly download that from places like this....
Chosen Solution I replaced the battery and the trackpad on my 2015 retina macbook. Afterwards, when power is attached it does not boot however the power chime sounds, the apple logo and progress bar flash for a second then the keyboard lights up for a few seconds, then all goes dark and it’s dead. From the above symptoms, it appears that the keyboard, screen, power and speakers are connected but the system is not functional....
Chosen Solution Hi! some months ago I lost my original battery charger, and bought a second hand one, which I thought was compatible. It is a Dell charger, and on the back it reads “input: 19.5V (19.5V) 4.62A(4.62A)”. Quickly after buying this new charger, however, the battery life started getting shorter, and now sometimes it looks as if the charger was just keeping the pc alive, but as soon as i unplug it the pc turns off instantaneously, just like a desktop would do....
Chosen Solution I see a black spot inside the lenses. Not dirty outside. What can i do? I can’t open the lense part by myself… usually cameras are pretty well sealed. if you dont have the skillset to open it, i would take it for diagnostics at a repair shop. this is the safest route. If youre prepared to replace it, tinkering with this one is a good way to learn the basics of the repairs and maintainence....
Chosen Solution Hi all. I’ve had a HS50exr for a while, and I’ve found a new issue. When I turn the camera on, even in well lit rooms, the screen and the photos seem very very dark, even with suitable settings for the light. But the main problem is, after taking a photograph, when the preview disappears, I return to the normal screen, but it is completely black. I have to adjust the zoom for any kind of picture to appear....
Chosen Solution I already received a new other product (Zoomer) because this problem, but my daughter still trying to play with Boxer. To the front our Boxer only goes to the left side, doing a turn, never going straight. But if I use the remote control to go back, it can go straight normally (only to the back). Is it a problem in the gears or in its circuit? I am thinking in maybe open it and try to fix....
Chosen Solution I have attempted to repair two 12-inch MacBooks, one 2015 and one 2016. Most recently a standard display assembly replacement. Now, I have two dead MacBooks. I average about half-a-dozen Apple repairs a month, both laptops and desktops with a nearly 100% success rate (excluding liquid damage jobs, where it’s more like 60%). I follow the same care and troubleshooting principles across my job, but these “12-inchers” are getting me....
Chosen Solution Just got the firestick. I have directv at home. The main tv is in the master and the satellite tv is in the living room. Can I plug it into the main tv and use it on the remote tv? I only ask as the bigger remote TV is difficult to move as its over a fireplace and everything is pretty tight back there.. Thx No unfortunately that won’t work....
Chosen Solution i only have ipad 2 charging port and i need to replace one on an ipad 3 Nope different parts Can you, please post info for my iPad 3. It may be beyond my ability. But, if I had the part number from a trusted source, such as Subba, I might screw up my courage. Otherwise it looks like I pay Apple $250 to service, refurbish. Thanks
Chosen Solution 私のPS4は2日前から動かなくなりました。3種類のHDMIケーブル、2台のテレビを試しましたが、まだ同じ状態です。セーフモードを起動していませんが、テレビはプレイステーションに接続されていることを認識しています。コントローラーに接続すると、ヘッドフォンからサウンドが出ています。ライトバーは正常に起動していることを示しています。(青いライトの後に白いライト) —— My ps4 hasn’t been working for two days. I have tried 3 different HDMI cables, two tv’s and it still wont work. Safe mode isn’t coming up but my tv does recognize its connected to a playstation. Their is also sound coming through my headphones when connected to my controller. The light shows itstarted properly (blue light then white light). what should I do? これはHDMIポートの問題のようです。この障害はPS4、特に旧モデルPS4によく見られる現象です。ポートに懐中電灯を当てて、詳細に確認すると、ピンが曲がっているのを発見することがあります。ポートに問題がない場合は、マザーボードのエンコーダーチップの可能性もあります。 —— Sounds like an HDMI port problem....
Chosen Solution 2008 Jeep Grand Cherokee Laredo 3.7 crank but won’t hold a start ? There may be Jeep Grand Cherokee public forums dedicated to owners sharing similar problems and answers. Try searching for these forums. Some may require joining with free membership to ask questions from other Jeep owners, possibly Jeep mechanics and technicians, and knowledgeable diyers. With little information provided, there may be several answers with only one being correct....
Chosen Solution TV Was used in my office for the past 2 years, and has not had any issues. Last week we did a generator test which cut the power gracefully, however it failed to cut back over, meaning there was no power surge. Once we got power back on the TV Was dead-ish. I plugged a roku into it, the backlight works as though there’s an image and the sound works, but no display....
Chosen Solution Hello I’ve been working on my 94 Chevy pickup it has a v8 350 when I bought it it ran an everything just needed eletrical ie lights and some brake work done I’ve been starting it up weekly it runs great it’s been stuck in the mud for awhile now an today when I tried to drive it out I noticed the driver rear tire wasn’t spinning at all....
Chosen Solution After redoing twice the whole step by step I did to add the new battery, the screen is still unresponsive. I can see a faint grid lines and both slides to “UNLOCK” and “POWER OFF” don’t work. What can I do next to fix this unexpected problem? What color are the lines? If they’re grey/white it’s a sign of a poor connection and/or ESD damage. You’ll want to power off the device (hold the power + home button simultaneously) and then disconnect the battery, followed by the screen....
Chosen Solution Still have loud banging noise after replacing bearings and seal, the shock absorbers and the driver belt on my Kenmore Elite HE3. What else do I need to replace to resolve this issue? Rear Drum with Bearing The rear drum has a bearing or bearings in it to keep the inner tub spinning smoothly. If the tub bearing system is defective the washer can become very noisy. On some machines bearings are sold separately from the rear drum, however I recommend replacing both the outer drum and bearing as an assembly if the manufacturer offers the components together because removing and pressing in the new bearing can be exceptionally difficult....
Chosen Solution Hi guys, I recently bought an Apple LED Cinema display and had some issues with it. Sometimes, the screen won’t turn on, it will stay black for hours but, the speakers and the USB work fine. I’ve been trying some tests on it and found that when I sleep with my window open at night, the screen will not turn on for hours when I try to turn on him the morning....
