Posts

Chosen Solution I need to upgrade from 256 to 1TB some pepole told me this model can’t upgrade only fausion drive model only can upgrade Sure you can. Just depends on how you want to do the upgrade. Either you can replace the existing 256 GB drive on the board (which would be a blade style proprietary Apple drive that looks like this. This is a third party variant, or you can get an adapter and install a more standard m....

Chosen Solution Idk what’s going on with my Samung Note Edge so I’m posting in this forum with hopes of reasonable opinion so I can fix it. So since I’ve bought the phone, sometimes when the phone sleeps due to inactivity I can’t bring the screen up by pressing the power button or home button. The blue LED light flashes but screen stays black. Sometimes it takes several presses of the buttons to get the screen on but most times it doesn’t come on....

Chosen Solution Hi guys, I recently dropped my 15” Early 2013 Macbook Pro Retina and it landed on the right corner. Now, it won’t turn on, unless it’s plugged in to a power source. I recently went in and disconnected all the wires and reconnected them, still same problem. Here’s my system report - Charge Information: Charge Remaining (mAh): 7783 Fully Charged: Yes Charging: No Full Charge Capacity (mAh): 7981 Health Information: Cycle Count: 53 Condition: Replace Now Battery Installed: Yes Amperage (mA): 0 Voltage (mV): 12415 Does anybody have a solution to this?...

Chosen Solution Can I upgrade the RAM in my iMac 2015 4K A1418 system? Nope, soldered RAM. Unless you replace the RAM chips and re-route identification resistors, you can’t upgrade the RAM. Also the model isn’t specific, be more specific.

Chosen Solution So I figured it was a speaker issue but I replaced the speaker and still same thing the ribbon looks like new there is no damage to it at all..if the ribbon was damaged would the camera still work perfectly? I’m at a loss someone please help… Not working at all? or just very quiet?

Chosen Solution Hi, I have spilt water over my keyboard and my MacBook has died. After extracting the SSD, it looks in good condition, with no corrosion to the pins. This is the SSD and the pins: I would like to either do one of the following: Place this SSD into a 2.5” SATA enclosure, so I can place into my 2012 MacBook Pro 13” Unibody.Place this SSD into an adapter to plug into my Windows M....

Chosen Solution First of all I Have Medec Anesthesia Machine it’s giving Major leakage after resolved calibration the problem of major leakage was solved. But pneumatic Board is not OK after verifiy pneumatic Board is faulty

Chosen Solution Does anyone own the schematics of the iPad 12.9”? I would need them to repair the touch filter Update (21.01.2021) OK following things are broken the touch filter is burnt and the solder lines too, I’m searching for a point to put a jumper. Does anyone have experience with that hello Expolosions&, those don’t exist. All we use is knowledge and experience in electronics gained through years of work....

Chosen Solution I got the XM3, and I learned that you have to completely dismantle the headphones just to replace a worn out headband. Is this also true on the XM5’s or is it different? Hi Unfortunately it’s a bit too soon to tell as they are still very new headphones Judging from the way they look and the way the headband extends it would seem that they would need dismantling a bit unless Sony has built in a release clip where the headband meets the headphones them selfs But that’s only what I’m thinking ,iv repaired many headphones and most of them don’t come apart easily Hopefully this helps Any questions please ask Thanks:-)...

Chosen Solution So in my Galaxy s8,the aux went bad. So i got a replacement from this site, got it installed and now its not working. I plug in an aux cord and it doesn’t register or anything. *EDIT. I also got a new daughter charging board. So i don’t know if its the port or the charger board… Try and buy a new headphone jack (Aux)

Chosen Solution about 2 weeks ago i was flying my DJI Phantom 3 pro at about 25ft i hit the side of my house and the thing dropped from the sky it tore the 4k camera right off and obviously broke the blades i replaced the blades ordered a new camera and installed it imu was re-calibrated compass was re-calibrated the latest firmware was installed recently (1.7) but now she wont sit still in the air, drifting back and forth dropping altitude almost 10 ft and the coming back up on it sown what an i do to fix it?...

Chosen Solution Battery on 2017 MacBook Pro discharges way too quick. Geniuses can’t find solution Update (12/18/2018) Does it discharge even when turned off? If not, then try to factory reset your OS and test a longevity of working with battery power only. If that does happen faster than in tests of this MacBook from internet-reviewers than you’ve got something wrong with either battery or power relay (and repair techicians are an idiots, is they didn’t find a thing, probably)....

Chosen Solution The battery on our Moto G4 plus has been draining quickly. I replaced the battery yesterday with an iFixIt battery and it is still draining quickly. We drained to below 10% and then charged to 100% with the Motorola factory charger before using. It is a quick charger. The phone was warm after I reassembled it and turned it on, even though I wasn’t running any apps. There could be malware running on your phone that is draining it’s battery....

Chosen Solution Hi, I did this exact repair, with the suggested linked battery. I have calibrated the battery multiple times. But it still drain within an hour. In fact I think the old battery I replaced held a charge longer than the new one. Is it the new OS? or something else I should be checking with the computer? Download coconut battery. You’ve likely got some old stock thing with a 5000mah lipo instead of 7200mah

Chosen Solution I have a iphone 7 plus. The connector to the left of the camera ones has broken off the board. It seems to be for the GPS, is this correct, as wi-fi and bluetooth seem to still work, as does the phone signal. see image. This is the UAT tuner, it is not for receiving any signals, but it will tune the upper bezel antenna to receive the correct signal bands....

Chosen Solution I was wondering if I can buy a home button off of eBay and and replace the defective one. If I do replace it, will I be able to use the home button? I don’t really care about the Touch ID feature. yes you can. replacement is easy. touch ID will not function unless apple does the replacement, and calibrates the serials of it to match the motherboard

Chosen Solution My friend tried to stuff a black cartage into the color cartage slot and when we took it out a piece broke off. Now it won’t hold a new color cartage. Can the tray and brackets that hold the cartage be replaced? Yes, but the issue with printers tends to be parts cost vs. whole brand new unit replacement totals out the machine with printers. In addition to that with these HPs unless you can somehow remove the printhead/cartridge carrier from the track belt, encoder strip and support bars without damage you need to change out the entire mech which usually means you need a donor....

Chosen Solution Pins got bent inside. Where to get fixed Take it to a professional at any electronics store. I would assume it could be fixed, but sometimes things don’t work out for the better. Hi there. im a mobile electronics technician, and i am happy to inform you of two great things! YES! it is very much repairable, and 2) The part itself is rather inexpensive, so if you are planning to do it yourself, it will not be costly!...

Chosen Solution My phone screen got cracked and when I put it on it went black and has a light showing lines on the screen. Can it be fixed and be able to work? Or would I need to buy another phone? Chances are you broke the LCD, (meaning all the other components of your phone work just not the display part of the phone) the fact that blue lines are going across your phone is a big indicator....

Chosen Solution my phone did the same thing about a week ago! i still use but it barely. i can only see the screen if i flash a light on it. i was face timing and using snap chat and that must of done it but i had a case on so i couldn’t feel any of the heat. Your display might need replacement. Cheers. If is not a screen problem so that must be the circuit of the backlight, must rebuild the circuit....