Chosen Solution Hi Just wondered if someone could help with this problem. I have a GTX560 Ti KFA2 Pci Express Graphics Card one of the 0.3uH chips which I believe to be a power inductor has burnt out. It has also left a nasty burn mark on the pcb itself which looks repairable, I just wanted some info on the burnt out part and what is a suitable replacement. Any help would be great thanks...
Chosen Solution Replaced my LCD and digitizer (cracked). After reassembly, the received audio from the upper speaker was low and scratchy. I cleaned it, it got only a little better. Volume buttons don’t help. If I use headphones, bluetooth, I can hear fine, volume buttons work on those. If I turn on the call to the speakerphone, the volume is loud, but the other party stops hearing me. This is a different set of symptoms from other similar call audio problems on your site....
Chosen Solution So i was studying late last night…I spilled water onto my mac. A significant amount, but initially it didn’t seem like there was anything wrong - no immediate screen damage or power issues like my last one. I put it in the tripod near a fan overnight. I think in my sleepiness I hit “sleep” and not “shut down”…This morning I turned it on to see 1/2inch of my left screen is now black with some verticle streaks....
Chosen Solution I purchased a pro tool kit a while back. Now I need tor replace the battery on my iPhone 6s Plus. My kit did not come with the required pentalobe bit. Can I purchase this separately? Thanks Ed Are you sure it doesn’t have the P2 screw bit? If I remember correctly they come with it in the box of screw bits.
Chosen Solution I have a bent IPhone 7 plus but it is fully working. Can i repair it easily replacing back housing? or is it more difficult? It is likely you cannot easily replace the housing because it would require you to take the entire phone apart and rebuild it in the new housing. A repair shop may be able to help but it is likely going to be expensive....
Chosen Solution Hello, My MacBook Pro 2019 with touchbar (model A2159) is damaged by Vanilla liquid! I leaved my device 72 hours in the tent position and then in open-book V-like position under sunlight for 45 minutes for 2 days. Now my laptop can be turn on. All the keys, touchbar, and trackpad work; however, when I touch any keys except power key, my laptop turns on! Apple store told me that your device is highly damaged and you need to change motherboard, hard disk and … so it is better to buy a new one Can anybody help me where/how to repair it?...
Chosen Solution Hi yall, so I’ve repaired a family member’s iPhone 7 with loop disease (we’ll send it to a repair shop far away that can do microsoldering to fix that.), but now that I’ve fixed the phone, its camera functions are completely gone. Both back and front. Now im wondering if i somehow maybe screwed something up. I’ve recconected both like 8 times. Thanks in advance! A dodgy back camera can also stop the front from working (aswell as the flash light)....
Chosen Solution So I have this MP3 player from this obscure company and I’ve had for a couple of years, now when I try to boot it up, nothing, not that I would be able to do anything since the D-Pad on it’s broken (Meaning that the D-Pad is literally pushed up too far) so I need help! Hi @ifixitm4s3r, Here’s a video that shows how to open the player. (Start at about 25:40 minutes into the video)....
Chosen Solution Good Morning, For some reason, for a long time, the system of my laptop can’t find the battery, and for this reason, I can carry my laptop without having a place where I can connect the AC. Please could you tell me how can I fix this problem Thank you Update (05/03/2021) advent monza t100 red Update (05/03/2021) This the answer I am getting. Hi, If Win10 is installed, try creating a Win 10 battery report and check the Design Capacity value versus the Full Charge capacity value to get an idea of the status of the battery....
Chosen Solution hello what could be? the deck itself puts pressure on the sensors, periodically every 10-30 minutes, what could it be? hello what could be? the deck itself puts pressure on the sensors, periodically every 10-30 minutes, what could it be? in this area as in the photo in this area as in the photo Дима Прем from your video and from what you are saying, this looks like a bad digitizer....
Chosen Solution There’s a short (2-3 second) grinding noise at the beginning of startup, before anything appears on the screen. I’ve taken the cover off and the fan is rotating ok. Any idea what it might be? It works ok, just worrisome. Update (03/14/2020) I replaced the fan. It doesn’t work. I think I may have damaged one of the electrical ribbons, going to see if shop can fix. But also, still have the grinding noise....
Chosen Solution I have the iHome docking station which I originally got for my iPod Touch in 2011 and I got the charger port thing that’s 30-pin to Lightning so that I can now charge my iPhone, but when I plug it in and it’s dead, I have to move my charger a bit so that it will charge. This doesn’t happen when my phone isn’t dead/partially charged. Is it the 30 pin or the lighting connection you’re having a problem with?...
Chosen Solution I bought a broken tv that didn’t display anything on the screen at all, but after replacing the power board I’m met with a screen that lights up with nothing on it, as shown in the pictures. I fixed a samsung tv with this issue by replacing the T-con board but I’m not sure if this will carry over onto this LG. Standby LED blinks 3 times turning on then stops, no logos or anything appear....
Chosen Solution Hi, Just picked up a 2nd User 15” MacBook Pro with Touch Bar (A1707). I’ve just noticed it sometime seem to go though a state of the blacklight flickering for a minute of so. More when I’m moving the Device (carrying) however if I change the brightness it will flicker for a second. Its not all the time. Just the odd now and then. Anything I should be worried about?...
Chosen Solution I have a zenfone 2 ze551ml , after trying to firmware update the phone shut off then never turned on , no power, no led and no vibration. when connecting it to usb charger no sign of charging..completely dead. any help? Hello, You nee to follow this guide: https://forum.xda-developers.com/zenfone… Greetings,
Chosen Solution My Hi sense sero 8 only lasts an hour froma full charge. Is there something in the settings to increase this. I have this exact problem, except the battery is draining faster every time it is used and put to charge again. I’m disappointed with this product, since I’ve bought it there were problems, I would never buy a product from this brand again! The screen isn’t cracked, nor has it ever fallen yet there’s a single key that won’t work, the backspace key....
Chosen Solution Help! I am in Africa and electronic parts are available…I just cannot find a circuit board diagram for my 1500w… the US blender was plugged into SA 220 outlet ( first was my fault as the step down converter wasn’t powerful enough) I repaired the resistor and used it a year with the proper step down and a houseguest zapped it. The motor is still fine but the resistor and possibly something else needs to be replaced and they are too burnt to tell the correct item....
Chosen Solution This MBP has been repaired doing a BIOS reflash to get rid of a damaged graphic card (well known issue for this model), so now only the base graphic card is used. It works completely fine in Mac OS. The problem is when trying to start it from the bootcamp partition with W7 Ultimate. The company that did the reflash informed me that they know this issue is a side effect of the modification of the BIOS but have not been able to solve it yet....
Chosen Solution So I was in New York for spring break and my charging cable was plugged into my portable charger, but it fell out of my pocket and the changing cable went through the part where you plug the USB into, therefore breaking it. Since then, the power bank will not turn on, nor charge my phone. Any suggestions? With things like a power bank, it’s best to just return it and check the warranty....
Chosen Solution I can only run my projector on high altitude settings for fans normal setting the projector or shut off in two hours.Are both fans supposed to run in the same direction Hi @benqth670 , Do you have to manually set the high altitude fan setting due to a notification from the projector or does the projector increase the fan speed automatically? Don’t know the answer to the problem, but this might help to explain things so that perhaps the problem can be found If your projector is similar to the one shown in the link there is a lot of air being pumped through the projector, so it is possible that all the fans are spinning in the same direction....
