Chosen Solution I just put in a new toner cartridge and the first five prints have 1 1/4” thick black lines spaced about 2 1/4” apart all the way down the page. Why is this happening? I installed correctly. Although this is not in English, the pictorials should help you: https://www.youtube.com/watch?v=qzPenRXA…
Chosen Solution My Roku 3 worked great for a couple months, but eventually it “froze up”, so I had to power-down and restart it. Now, when it starts up, the first thing it does is search for my home Wi-Fi ….WHICH IT FINDS AND CONNECTS WITH. BUT THEN it starts searching for “my home network”….which I can’t understand, because: (1) it never did this step in the past, and (2) if it is already connected to my Wi-Fi, then it ALREADY IS connected to my home network…....
Chosen Solution Hello, I replaced my charger port down from what seems to be a seamless transfer. But the new part still connects and disconnects when I move the phone while it’s plugged in. I have multiple idevices with lighting and they work fine on my other devices. What went wrong? Usually issues with charging port are because the dust is gathering in the lightning hole. Are you using original cable and adapter?...
Chosen Solution I’ve had the display (full upper case) replaced third party after I somehow managed to crack the LCD. My insurer’s terms are you have to use a repairer company that they specify (and accidental damage is not covered by Applecare in the UK) which is not Apple Authorised, so they have to use refurb parts. It’s all good except for the light sensor. Shine a torch at it, cup your hand over it, nothing happens....
Chosen Solution I have a Craftsman digital multimeter that is in good shape and works great. The readout has a black blotch in it and makes it almost impossible to read. I don’t know what caused it and I have never dropped it. I could fix it if I could find a new readout component. Any suggestions? Hi James, possible to take pictures of your multimeter ? front and back? https://www....
Chosen Solution The Blade A7 Prime was not an option on the initial screen to id my phone. It got wet. It’s flashing back and forth from “ZTE” to BLACK SCREEN at approximately 7 second intervals. It also vibrates like it does when normally operating. I can not turn it completely off as there is no change like the phone isn’t recognizing any function I try other than, when holding up/power it will stay black as long as I hold it....
Chosen Solution The bluetooth speaker only works when it is plugged in. What would cause this fault Here’s the guide on replacing the battery: JBL Xtreme battery replacement ur internal rechargeable battery might night replacing Pressing the connect plus + buttons until a red light flashed in the line of battery charge lights. Unplug, switch on and off and then plug back in…. FIXED ALL PROBS!!!
Chosen Solution I did a screen replacement for my iPhone 6s, I was not careful enough when putting the camera back in its place and I managed to destroy this cable. I’m wondering where I can find this specific part cause the video I was using said it was a very important piece, or if there is a DIY method of repairing it myself. A picture reference is given. It’s the cable that is used for the earpiece, the speaker that you use when having a regular phonecall....
Chosen Solution Hi, I have a broken rear camera lens broken and camers no longer focus and spotted. There are very few parts fit ther and iFixt it doesn’t list parts for the S7 Active. So was wondering if the S7 EDGE camera(which by specs is the same) will fit the S7 ACTIVE. Samera for camera lens galss cover. Thanks. From what I could find only the front camera is shared between the s7, s7 edge, and s7 active....
Chosen Solution Hi all, Can anyone help identity this capacitor? (Red box in image) it’s missing on my Mac mini. It’s clearly been ripped off, I can see the remaining solder on one of the pads. Oddly the Mac still works but it must do something right? My guess it that since it’s near the Broadcom BCM57765 it’s got something to do with the ethernet? https://imageshack.us/i/poJjrBlej Schematics for minis are rare, if you can identify it a new one can be purchased @ mouser....
Chosen Solution When replacing the battery on my iPod the battery was so stuck with the adhesive, that when it finally came loose, I severed the orange ribbon cable that goes to the hold switch. As such the iPod thinks it’s eternally on hold. Can I fix it? The ribbon cables are so small and delicate that repairing the ribbon itself isn’t really an option. However, replacing the headphone jack/hold switch assembly (30 GB or 60/80 GB) is an inexpensive and easy repair....
Chosen Solution i have purchased FLEANE FM13A 1TB PCIE 3,0X4 NVME and OWC 2TB 6G SSD, and I installed both on my IMAC late 2013, however, I noticed that the OWC is mounted but as storage only (like an external storage drive) while the PCIE contains all the IMAC operating system that I got from the migration process after installing it. My intention was to use the 2TB OWC storage to boost my IMAC storage and to have the PCIE increase the boot speed of the apps....
Chosen Solution Can You Fix a Defective Laptop Keyboard? A laptop without a working keyboard might seem like a massive block to productivity, but it is possible to repair. This might involve some simple hardware and software maintenance, or it might require some hands-on repairs with your laptop’s insides. My laptop keyboard is repaired. Because once I am building a site my coffee cup is dropped on my keyboard. Usually when it comes to keyboards once they’re destroyed they’re not easily repaired....
Chosen Solution I have a Sennheiser RS120, I can only hear two of my “Dish” DVR recorded shows. I am using a Optical Digital Audio Cable from my TV to a Audio Extractor with RCA jacks. I can not hear anything other then Two Dish DVR recorded shows. I can not hear anything on NETFLIX or AMAZON PRIM. Can you help? Thank you, William Hi. I think you may have misunderstood how this product works....
Chosen Solution My laptop was on and logged on to Facebook and it got slammed shut ,now it says that Windows won’t start normal! I have turned it off and took battery out ,and let it sit for about 10 min . then tried it again and still won’t work ! Any ideas? When you first start up, will it boot into a window’s safe mode? Usually pressing an Fx key like F8 will give you the option to boot in the safe mode....
Chosen Solution I am having issues with my 94 Camry LE 2.2L overheating so, I went through and replaced almost everything in the cooling system, except the radiator, because that was cracked and leaking when I bought the car, so It was done a few months prior. I replaced all three coolant temp sensors (two of them just before the upper radiator hose, and one on the bottom of the radiator) thermostat, flushed and filled fresh coolant (made sure no air in the system)....
Chosen Solution NO you can not, I already tried it myself. Lucky you the screen is way cheaper then mine (Find 7 x9077) Now I replaced the screen myself, but when I putting it back to one piece, i lost my power and volume button parts for in the motherboard, so the %#*@ thing won’t fire up anymore… I can confirm. The LCD+Digitizer is all one unit. I HIGHLY advise to buy a replacement that already has the frame (front cover) glued on, otherwise it’s a messy job to glue it into place and run all the ribbons properly (and they are sold for the same price) Feel free to PM me for more info....
Chosen Solution Are the back glasses for the iPhone 8 and the SE compatible, and if not, how do you tell the difference The main issue isn’t the compatibility. How these backs are built means you need to worry more about the camera cutout, as Apple welded the camera lens around the glass for a seamless look. That said, the iPhone 8 and SE 2 chassis are basically going to be nearly identical (the SE just uses the iP11 SoC, and a different board) but if you can get a piece of iPhone 8 glass with the proper cutout don’t chance SE 2 glass being incompatible....
Chosen Solution Just getting hot air. Even after i move the switch to the A.C Possition is still blowing hot air There are a few basic points that you have to check if getting hot air from AC. Check the AC mode. Change it to the cooling mode.Clean dust and slit from the fin of the AC. Use water and soap foam to clean it.Check the temperature sensor.Confirm you have cooling gas in your AC and the compressor is working....
Chosen Solution Past few weeks, I posted a few questions on this website regarding my iMac A1312 not turning on. LED 1 kept lit up so I know there is power coming in. No chime, no fans, no nothing when I pressed power button. I changed Power supply, the DC cable, power cord, logic board AND the power button. NONE of it was the reason that my iMac does not turn on....
