Chosen Solution Please help, My Laptop (Toshiba Satellite L75D) turns on, indicator lights on, fan is running, but the screen is black. I tried all the instructions but nothing worked. Any idea how to fix this? first you must do some tests before like changing the ram connect to external lcd then i will told you
Chosen Solution I have a 3DS XL and there are a few buttons that require extra pressure or don’t work at all but I can hear them clicking so I know they are not stuck, left on the dead requires extra pressure, down on the dpad doesn’t work at all, unsure if the x button works though, I have cleaned the pads to eliminate dirt but I fear it may be the buttons on the board itself...
Chosen Solution My option to switch the camera to the rear isn’t there anymore and on snapchat when I try to switch it doesn’t work. How do I fix the camera to where it will switch. Here is the online manual to it, it should give you some help: http://www.manualslib.com/manual/913783/… I lost the ability to use my rear-facing camera one day when I dropped it that had been Maybe 4 months ago from August 2016, so when I dropped it this time in August 2016 I decided I wanted to see the battery when I took the whole back off and put it back on and noticed a little computer piece was broken off and out I took the back back off of it the phone, and snapped it back in and noticed that that piece was actually right behind where my rear facing camera was....
Chosen Solution Does anyone know if you need to replace the entire display to install a new webcam or if the display can be separated and a new iSight camera be slotted in? If you can slot in a new one, does anyone have any recommendations on where to get a new one/genuine OEM part? Apple doesn’t offer the camera as a replaceable unit. Sadly only the full display assembly is offered....
Chosen Solution So i have an old ipod touch gen 5 that ive had disabled for roughly 2 or 3 years because i forgot the password and since im not smart i kept trying till it was disabled. I dont think ive done a backup on it so i dont wanna use itunes to unlock it as id lose all the data that im trying to recover in the first place....
Chosen Solution I set that one Black screw near the edge of the table and now it has vanished. I have other silver screws the same length. Can I simply replace the screw that’s located near the top of the logic board? I didn’t know if the Black screw was different than the others. Thank you… The longer screws if u tighten them in the wrong spot can end up damaging the screen… so if uve lost the screw leave it alone and dont put any other one in that hole…...
Chosen Solution Hi, I recently wiped my PS4 clean I got USB and reinstalled system software, it boots up to the screen that says connect you dualshock 4 controller and press home button, I try and try again won’t let me get passed that screen, I can go to safe mode and my home button works just fine to access that, I’m completely lost anything might help Try replugging the micro USB charging cable for the PS4 controller and wait for a orange light on the controller to show up and it should sync....
Chosen Solution I’ve currently got 4GB and would like to upgrade to 8GB. 1066 mhz 2x 4GB or 1600 mhz 2x 4GB Is my MacBook comptabile with the 1600 and is this the best/fastest option? Here’s Apple’s upgrade page: MacBook Pro: How to remove or install memory As you can see Apple states: PC3-12800 DDR3 1600 MHz as what the system needs. It will also support 1600 MHz RAM but it won’t offer much improvement....
Chosen Solution Mid 2011 27” iMac A1312 EMC 2429 I would leave it in sleep mode. One day I tried to wake it up and everything about the Mac was dead no response. iMac was plugged into surge protected power strip and devices plugged into power strip works fine. Decided power supply in iMac was bad. Ordered new power supply from iFixit P/N: IF174-000-1. Removed iMac front glass and screen noted when replacing power supply that the part shown online visually matches the old power supply in iMac, but new part doesn’t visually match....
Chosen Solution When I changed the screen then connected the camera ribbon it started to get really hot please help or is it fried The cable or the part was probably accidentally damaged during replacement, you better disconnect it at once to avoid further damage and buy a replacement part.
Chosen Solution I replaced my screen and LCD. Double checked all connections during and after reassembly. Screen goes black and unresponsive during a call but seems to work fine otherwise. Anyone come across this problem? Yes. After getting my screen replaced the screen immediately turns off when placing a call (or answering) without letting you turn it back on, until the call ends.. sounds like your issue? The problem is with the proximity sensor always detecting something “near”....
Chosen Solution Alba screen cracked on the out and In side and picture is muliti coloured with lines and different shape colours my screen i cracked really bad can any one help me to fix it please How much will it cost to repair crack screen yes have crack screen Alba tablet Kurio inner screen is crack black ink on the screen when I turn it on
Chosen Solution Antenna broke off from plastic fitting on controller. Ordered Plast-aid to fix but unsure how to apply it and stabilize antenna. I am looking for a replacement antenna for my DJI phantom 3 advanced do you know where can I find it?
Chosen Solution Hi friends. I purchased the ifixit Series 3 screen replacement and the ifixit Force Touch Sensor Gasket for Series 3 watch. The watch is A1860 (Nike + GPS + Cellular). I have two questions. Question 1: What is the proper adhesive replacement for the screen assembly? The 3M custom cut adhesive tape is not listed as compatible with this model/series. Does the force touch sensor gasket replacement include two sided adhesive itself so that no other adhesive is necessary?...
Chosen Solution So… In trying to trace a problem with charging (which i fixed!), i managed to mess up at least one of those horrid ribbon cable connectors (i believe) because, as the title states, the keyboard and touch-pad no longer function and the three ribbon cables are the only things i can think of offhand that i probably messed up on. I know for certain that i messed up with the smaller cable that is close to the front of the computer, by memory, roughly close to where the hard drive is and the USB ribbon connects, and i am fairly certain is for the touch-pad....
Chosen Solution Good day, I have an lenovo laptop G505 it only çame with one audio port that’s audio out I think headphones how do I get that port it be audio in so I can connect my guitar please help NO NO NO !!!! Audio OUT leads to speakers, headphones, and other audio-OUT-PUT things. A guitar is a audio-IN-PUT thing, like a microphone. You must have a audio-input-port for guitars and microphones....
Chosen Solution My battery says ‘replace now’, but has only completed 670 cycles. Do I need to replace? Here is a readout from coconut battery. Any advice would be appreciated As per your photo, your battery currently has zero charge in it and is only capable of holding 217mAh out of its original 6559mAh, a reduction of about 97%. So, yes, replace your battery.
Chosen Solution Hello, I just replaced the display of iPhone SE 2020. After replacing, I wanted to charge the device. It recognize the charger and also shows it is charging, with the charging sound, but the battery percentage wont change, until the phone restart itself (every 10 minutes +-). Then, after the phone starts again, it is showing real percentage of battery, so for example it was on 70 %, I charged it, the percentage did not change, then it restarts itself and after start the battery is at 76 %....
Chosen Solution Battery won’t hold charge There are a few possibilities here. Broken charge connector: If the connector has been handled poorly, it may no longer allow a connection between the cable and the device. This usually means soldering a new connector on to the board. They are quite tiny. You can also attempt to clean the connector with some contact cleaner, which is pretty cheap at any hardware store. Failing that, youc an use isopropyl alcohol and a tiny coffee stir-stick or other tiny implement....
Chosen Solution I’m only able to boot up my macbook in safe mode if I tryto boot up it normally then it getting crash also the fan is running every time means when I press the power button the fan start running, I’m not able to see battery icon in menu bar and battery indicator is not working….. I tried all trouble shooting steps like NVRAM or PRAM reset and SMC reset…when I did apple hardware test then I got PPT001 & PFM001 error code……I also tried to remove the battery cable for 30 sec and then reconnect it but this also not work for me…....
