Posts

Chosen Solution I have two ps4s in my household, both of them turned off by themselves at the same time. House power didn’t flicker or turn off. I thought it was very strange. They are plugged in separate rooms. Wondering if this has happened to anyone else. Maybe PlayStation network? Or maybe my house is haunted lol answers would be great so I stop freaking myself out lol Power may not be stable in your house on that certain electrical circuit that both the ps4s are most likely plugged into....

Chosen Solution I want to change out my logic board in my MacBook Pro 15. I have 16 gigs ram currently. Why are there different prices on logic boards with differing ram? Am I not just taking out my existing ram and replacing it inot the new board? @jimayers the RAM is soldered to the logic board. Whatever memory the board comes with is the memory you will be stuck with....

Chosen Solution I recently replaced the battery on my iPhone 5S as the battery life was awful, and everything was working fine. Volume buttons up and down, flash, flashlight, both cameras were all good. I went to take a picture last night and now the flash is not working. I tried turning the flashlight off and on, doing a home & power button reset, and a system restore - everything that you can find online to try, I have tried....

Chosen Solution Hi, Wanted to know if I can change the panarello wand that came with the machine because I had lost one of its parts(which is no longer being manufactured) and one of the o rings in it shoots off when steaming. For everyone not familiar with this machine it doesn’t have a normal steam wand, you can search it online. Please specify with details about alternatives I think this is the part you are looking for: https://www....

Chosen Solution Heyy everyone :) I need new RAM in my MacBook Pro. I want to get the Impact, but I’m not sure if it will fit. Does anyone have any experience with this RAM in a MacBook? I heard it fits in a 2011 MacBook, but can’t find anything on the Mid-2012. Thanks in Advance! The Mid-2012 and 2011 MacBooks all use DDR3 1333MHz SO-DIMM modules, so if it works in the 2011 in will work in the Mid-2012....

Chosen Solution Доброго времени суток уважаемые пользователи форума, сегодня я столкнулся с такой проблемой: после замены аккумулятора на iPhone 6s не заряжается устройство, как только я его включил после замены аккумулятора был 1% зарядки, далее я поставил устройство на зарядку и сразу показало 30%, при чем за 1час зарядки не прибавилось ни одного процента (на экране показывает, что идет заряд). Как только я начинаю использовать свой телефон, через 30 секунд он перезагружается, даже если подключен к зарядке....

Chosen Solution On the Essential optional 360 camera will not start. Why? phone to see camera when connected but won’t. I’m bummed my post dissappeared when i tried to edit but oh well. First and formost do you have an essential phone (ph-1) perhaps. Can you please give model for phone and 360 camera. As with the little research i did it looks as though they have to go hand in hand....

Chosen Solution Dear people from the internet, My brother dropped his 3ds XL and hereby he broke the case of his 3ds XL. My other brother and I bought him a new case and I’m trying to put the motherboard from the old case in the new one. Since the hinge got lost, I bought a new one for him, but I can’t seem to put it in the case. I tried to follow the steps from this movie (https://www....

Chosen Solution Note: My TV is an Emerson, but it was manufactured by Funai. The EXACT same TV is sold as a Philips Magnavox. I have an Emerson TV, Model No. LF501EM5F, Serial No. DS1A1422155472 (A3AUQUH). According to the label plate, the TV was manufactured by Funai. The TV has had a problem for between 9 and 12 months. The problem may have gotten slightly worse in the past few months, but not much worse....

Chosen Solution is there a device usb or hdmi that i can use to make my n5300 series samsung tv blue tooth capable @snelle there are Bluetooth adapters but it will all depend on what you are trying to accomplish. Check on here

Chosen Solution When I turn on the knob for air/heat nothing blows through vents. What could be the problem and how much could it cost to repair it? Thanks First off get your car scanned, if you live in the States. Some auto places do it for free. Check your fuses, and relays. On the fuse box it should tell you what fuse is what. Also the hand book should tell you if you have it....

Chosen Solution My iPhone 7 was stuck in a reboot loop, so i ordered the battery kit because i thought it was probably a loose connector or the battery is not giving the minimum voltage the device needs to boot. While opening the device i snapped the ribbon cables of the screen (they should really make the warning for that MUCH bigger). I used an Iphone 8 screen and it booted!...

Chosen Solution Hi, my battery cover for my GoPro hero 5 is broken and needs replacing. Is there a way I can get it fixed at all? I can only find the chip door replacement. Hi Here is a link to the part that you need https://www.ebay.co.uk/itm/394037903268?… You might need to take the door apart (old one) to get it off as there aren’t any guides in getting them off yet unfortunately Hopefully this helps Any questions please ask Thanks:-)

Chosen Solution Hi! I purchased last week the battery replacement kit from iFix for my Mid 2012 MBP. Swap went smooth, just like the article explains it. However, I’ve noticed that after the battery is fully charged. it doesn’t hold the charge. I left the laptop with about 80% last night, shut it off, when I turned it back on this morning, it immediately dropped to 6%. Is there a reset or a software step I have to take after the new battery is installed?...

Chosen Solution Hi guys, I have a MacBook Pro 2012 (non retina) with a swollen battery. The battery still worked fine, holding some charge for about an hour, but I decided to fix it. I opened the battery, discarded the swollen cells, and replaced them with healthy cells from a donor battery from another MacBook Pro 2012. I checked all six cells with a LiPo charger, and they all hold >90% of the original capacity, so they are very good....

Chosen Solution hi, bootcamp keeps crashing after i press the continue button. Here is system info Can you execute an SMC Reset - How to reset the System Management Controller (SMC) on your Mac - Apple Support - and check if you get any further? Try booting up in Safe Mode Shift (⇧), once there check your drive using Disk Utility and then review your crash report Reference: Mac startup key combinations

Chosen Solution Do you know where I can buy a replacement glass for the Surface ? The glass is cracked but the screen is ok, I can still use it… http://www.mylcdtouchscreen.com/ Sells just the glass for a good price Mike Asseraf, “LCD and glass are fused together” from here . This usually means that it is almost impossible to replace one without the other. Check on here for a replacement. Still costly but the only ones I found thus far....

Chosen Solution I recently replaced the screen on my iphone 7 plus. After reassembly, the front facing camera on the screen is only working in the camera app or any IOS apps. If I try to open the camera in any other app that does not use the IOS camera api or controls (snapchat, instagram), the app will crash as soon the the front camera is opened. Apps the use the IOS camera controls (Gmail, messages) work fine....

Chosen Solution i took some photos and turned off the camera , days later i tried to switch it on and it doesnt work , it tried a different battery and a different lens and a different sd card it wont works … please help It was also. While not charge the battery, the camera does not turn on. Before turning off the indicator showing a fully charged battery. Charge the battery, even if you think it is already fully charged and try again turn on the camera without a memory card....

Chosen Solution My PowerMac G5 dual 2.3 early 2005 would not power on for a couple of days. Clicking the power button would get a single light flash and a click, the fans would try to start spinning but fail, and it would quit. I tried all the usual resets, unplugged this and that, and gave up. A couple of days later I tried it again just for the heck of it and it started....