Posts

Chosen Solution i press power, and the blue led turns on 1 second, then goes off, and the console doesn’t start, help please. You’ll need the boot.firm file on the root of the sd card. Specifically this boot.firm, since the latest boot.firm won’t work with your softmod. did you softmod the 2ds recently? Remove the SD and reformat it to FAT32 that’ll fix the issue. It is probably the battery. Mat need to clean it or change it

Chosen Solution Hi, My son bought an Iphone 5c and did an update on it and now it says he is locked out without an itunes password of the previous owner. We bought it online so we could not contact her. Is there anywhere this is fixable? This is strictly a software question, and thus is out of reach for many iFixers. You have several options: replace the logic board, or take it to Apple, explain, and have them use their custom software tools to decrypt and wipe the device....

Chosen Solution Hi guys, I am working currently on a water damaged logic board 820-00165 Its my first time and I am still figuring things out. Right now: No charger light, no fan spinning Voltage is on PP3V42_G3H 1.79-1.8V When injecting 3.4V to PP3V42_G3H fan is spinning. I connected the display to see if I get an image and there we go. Display and SSD working. What would be the next step to see what cause only ~1....

Chosen Solution We have a Bosch classixx 1400 express. It runs perfectly fine until it starts the spin cycle. At a certain (low) RPM it will clonk/bang loudly about 5 or 6 times. Then once it gets too about half speed it stops making the noise. It does the same when slowing down but not as noisily. It’s done this for about 6 months and hasn’t got any worse. Any ideas what the problem could be?...

Chosen Solution Hi I have uploaded windows 10 and having problems, I have tried to restore my laptop to the factory setting pressing Ctrl Alt F10 and it will not work ? Can anyone give me some guidance please thank you You need Windows install CD first. If you have that then follow the option given below. Insert Windows installation Disk Go to Boot order through Boot Menu by press F2/F8/F9/F10/F12....

Chosen Solution screen goes blank but sound stays on,need to unplug tv and leave for a while to get picture back Chris Teago while the screen goes black but you still have sound shine a flashlight beam at an angle against the screen. Check to see if you can make out shapes and silhouettes. If so you know it is your backlight. If not then you will have to measure the output from your main board to your power board as well as the voltages on your LED connectors....

Chosen Solution Deregister stuck won’t register phon after hurricane Harvey I assume it was wet? Let’s crack it open and give it a good cleaning with a toothbrush and 91% isopropyl alcohol.

Chosen Solution From last question, I’ve reset everything, formatted hard drive, erased etc. Dan suggested I get a new hdd (ssd) which I did. I also checked to make sure it was compatible with my 2006 2.16 Ghz macbook A1181. After installation, pretty much as before when I changed hard drive and cable. My bootable usb now shows up, but no hard drive in startup pane. When I hold option on boot and it does decide to go, the hard drive shows up in disk utility but not in startup panel....

Chosen Solution My screen is doing this when I haven’t used my macbook in about a half day (so I only have this problem ones a day) Anyone know why my screen is doing this, and know how to fix it. It have done it for a long time and the computer have never got any damage. If you are talking about having to log back in and the background being fuzzy, this is normal on later operating systems....

Chosen Solution Hello i have a brother whose Asus Zenfone 3 Max ZC520TL phone screen got broken, how can it be repaired and how much does it cost? You can either bring it to a repair-shop and ask for a repair estimate (they will probably charge you 60-70$), or if you have good experience with electronics and feel like repairing it yourself here is a Video Guide on how to do it....

Chosen Solution After replacing the screen and putting the phone back together, the backlight shines out of the hole where the camera is slightly. You can see it easily just looking at the phone. We bought the whole screen assembly, is there a way to adjust this, or do I need to send the part back for a new one? You can definitely take the display assembly back apart and try pushing down on the backplate....

Chosen Solution My USB C has bad connection in one port at left side. Is it possible to repair this port? As it turns out Apple did a smart thing with the USB-C ports. They are setup as a replaceable module! Here’s a good view of one of the two modules. They are quite easy to get to as well, disconnecting them from the logic board and a few screws and out it comes....

Chosen Solution I wanted to replace my battery, so I found the best-reviewed iPhone repair vendor in my area. After the technician completed the repair, I noticed the face ID was no longer working. I checked the settings and said the battery is an unknown part, “unable to determine if your iPhone battery is a genuine Apple part.” I brought it back to the technician, who opened it up and said he must have scratched the connector to the front and to come back on Monday for the owner to repair it....

Chosen Solution [Note: ifixit doesn’t have a category for Solo 3, so I had to chose Solo2] I’ve had this pair for a couple years now, so when I started to notice the symptom of a charge not lasting as long as it once did, I immediately suspected the battery and replaced it. Now, with a fresh battery, I’ll charge it and still only get ~5 hours worth of use, because the battery will even drain while it is off....

Chosen Solution Hello everyone,i have a proble with my iphone 7 !When i get phone calls in my iphone and is ringing the screen remains black.Only if i push the lock button it will react(juts ends the call and the screen respond normally,Please let me know if i can do somthing for that. Thank you in advanc guys. Hi, this may be a software issue or a hardware issue. To try the software repair I would reset your phone to factory settings and set the phone up again....

Chosen Solution My OS is 10.13.5 I believe that my bluetooth has stop working after the upgrade?? How do I determine if this is a software or hardware problem?? First thing is to open Bluetooth in System Preferences and see what’s on the list there. Also, does it report Bluetooth as ON?

Chosen Solution Hello! Yesterday both fans in my bathroom stopped working simultaneously. They are on a separate switch button, so the light is working, but when I press the fan switch the light button on the one fan lights, but they don’t rotate. Where do you think is the problem - in one of them, in both, or in the installation? Hi @arduan , Please verify that there is there only one light but two fan?...

Chosen Solution Hey. Is there an easy fix for this broken battery port on a MIX 2S? I opened up the phone myself, voiding the warranty because Xiaomi support were taking weeks at a time to reply to simple messages. I was too impatient to wait months to get a few messages from them and have the phone sent from Australia to China for repairs and then back to Australia. They are subsequently not honoring the warranty and have also refused to offer any advice for fixing the device myself....

Chosen Solution Hello, so this morning my phone was fine. I just got off of the phone with a friend and the audio and display was fine. I think as I got out of the car I dropped my phone and that’s when the problems started. My phone works completely fine all around except for when I go to make a call or when someone calls me. When I make a call, the display locks up and there’s no sound coming out of the earpiece or when I put it on speaker....

Chosen Solution I dropped my D3100 camera off our counter top. Now when I take a picture it is black. LCD screen is displaying fine. When I download the pictures they are black as well. Some say to see if shutter is moving but it will not let me do that when lenses is off. Previous pictures show up on the camera fine it is just new pictures taking come out black....