Posts

Chosen Solution Yesterday my iPad mini was together with a bottle of water in my bag which was not closed. The iPad got wet and now the speakers do not work, but if i put my headphones in the output i can listen to music (only on the headphones). Do somebody know how I can fix this problem? Thanks for your help and best regards, Dominik doschaumburg, “The iPad got wet " to avoid any further damage, I suggest you no longer try to charge or turn your iPad on....

Chosen Solution Samsung galaxy tab 4 7.0: Wondering if I can upgrade the internal memory on this unit by just replacing the motherboard. The charging port is bad so I was going to install a new board and thought I could upgrade at same time. Is this possible with out any other issues or software problems? deslyper that is actually the only way you can increase your memory. Yes, you can install a 16GB board in your 8GB case....

Chosen Solution Hi, I have this unpleasant situation with my Fenix 3 w/ OS 8.9, which I’ve bought just 3 years ago: suddenly , I can’t get temp, pressure or altitude readings, just a dash or nothing in return. Trying to calibrate the altitude manually will result in a ‘calibration failed’ message. The GPS method returns the altitude from sats but can’t set it either (same fail message). So, GPS, compass and everything else are working just fine, all except this all-in-one ‘weather’ sensor - for temp&airpressure - that comes solded on the chasis, separated from the motherboard and connected through 3 pins....

Chosen Solution I have a 2017 MacBook air (A1466) with a dead battery, and an older model (A1369). When I Google the battery replacement for each model they seem to be compatible with each other. Can I just use my old battery in the new one? Thanks, David Here’s the needed battery: MacBook Air 13" (Late 2010-2017) Battery as you can see Apple used the same battery across a wide range of Airs (2010~2017)....

Chosen Solution I heard you can use an A1708 display on an A1706 MacBook but the webcam won’t work. Is this true? Thanks. For reference here’s the 2016/17 MacBook Pro TouchBar (A1706) displays: 13” MacBook Pro Complete Display - Space Grey, Apple P/N 661-0797013” MacBook Pro Complete Display - Silver, Apple P/N 661-07971 And here’s the 2016/17 MacBook Pro Fn (A1708) displays: 13” MacBook Pro Complete Display - Space Grey, Apple P/N 661-0797013” MacBook Pro Complete Display - Silver, Apple P/N 661-07971 So what is the difference?...

Chosen Solution And what will it cost Hi, ifixit does not do repairs. Anyone can offer free advice on how to fix it yourself or what to do if you cannot. If the TV screen is physically broken it cannot be repaired. The screen has to be replaced. Replacement screens are hard to find however. Disconnect the power from the TV and then remove the back cover. Find the make and model number of the screen on the back of the screen itself....

Chosen Solution I can not start My mower sentinel by Murray 30 inch I have tried most things I have used it once but is there a special order to start, the light comes on but when I turn the key nothing first check the battery voltage with a volt metor if it is below 12 volts charge it and if that dont work check if the mower is in gear or blades are on if that dont work find your mowers safety switches you can go online and get a wiring diagram and look there or look up where they are on youtube or the general area i suggest looking is on top of the trans and for the mower deck follow the deck height lever down and look for wires and what you looking for is a button that is either stuck on or off clean the switches and try again if that doesn’t work i say try and find the starter solenoid and check if that is bad there are hundreds of videos on how to check it....

Chosen Solution While attempting to maintenance my brothers switch I ended up stripping a screw on the backplate. Is there ANY way that I can remove it without damaging the backplate? I used an iFixit kit but the console is refurbished so I guess they tightened the crews too much. Any working methods besides rubber band or superglue will help. How bad is it? In my experience, I’ve been able to get away with using a slightly larger bit and applying lots of pressure to remove mildly stripped screws....

Chosen Solution Hello android pros, I am looking desperately for some help regarding my phone. I recently purchased an Oukitel U15 Pro, and I am having trouble with it stating “Cannot register to network”. I have searched low and high online for methods on how to fix this and nothing seems to work. The last thing that I haven’t tried is to root it. Now, I am by no means a new age tech savvy person, however I felt comfortable to try this, however, I do not have a PC, which seems to be the only way to accomplish this....

Chosen Solution I replaced my iPhone 5’s battery today following the iFixit instructions. Everything appeared to go smoothly and was trouble free. After the replacment, the device was powering on, charging correctly, all buttons are functioning as well, and Wifi connections work just fine. However, I can’t connect to the cellular network. I have updated the date/time via settings and rebooted the phone. I also reset network settings and finally reset the entire device back to factory settings....

Chosen Solution I bought ps4 slim here in taiwan. Here in taiwan the electric voltage was 110v. My question is. Can I use 220v when I go back to philippines? Thank you Hi Kuya buk noy AFAIK, it is. Compatibility 220v & 110v? Model: ADP-160CR AC Input : 100-240V 2.5A 50/60Hz DC Output: 12A,13V

Chosen Solution I cannot seem to get this device to charge at a decent rate. When plugged in, it only pulls 0.83 A at 5.65 V. I have installed a new battery and have also reset the device, several times, each time it works marginally better for a while, then back to slow charging issues again. I have tried several different Samsung charging units and cords, all with the same outcome, slow charging....

Chosen Solution I dont think so But i see why you might want to, thats i good phone The 5s and SE are similar outside, but very different inside. You can’t use a 5s back on a SE, or vice versa - or interchange the boards.

Chosen Solution acer goes blank when power supply connected ,since windows 10 up date It does not turn off the screen goes blank thanks for any help you can give Solution #1 To fix this issue, go into Power Options, Edit Plan Settings of the active plan, set Change plan brightness to the maximum for both battery and plugged in. You can access the same setting under Change advanced power settings>Display>Display Brightness....

Chosen Solution I have a 55 inch zenith all off suddenly my picture went black but could hear it and change channels Josephine Pagan in a darkened room and with the TV screen black but the sound still playing, shine a flashlight at an angle against the screen. If you can still make out shapes or similar, you know that your backlight is out. Possible the backlight strips. If you do not see anything with the flashlight then it is most likely your T-Con board....

Chosen Solution How do I fix if all power windows don’t work. Hi @brianfeist , Have you checked that fuse #12 (50A)in the engine bay fuse block is OK, you didn’t say? (click on image to enlarge for better viewing)

Chosen Solution This is not a One X, just HTC One. Purchased through AT&T several years ago. Battery is sealed into phone. It was dead, I plugged it in to a wall charger, & left it off. Hours later, phone would only give me a black (blank) screen when turned on, and never went off until I held down the power button. I’ve tried the “bright light in the upper left (and right) corners without any change....

Chosen Solution I dropped my phone in my pool and immediately took it out and it was still working perfectly fine. Then I put my phone on charge at least 50 minutes after and it appeared to start to shutdown and start up. Eventually I left it on charge from 35% to 95% and after that when I turn it on it loads of the mi logo but as soon as the powered by android text appears the screen goes black....

Chosen Solution my headphones will cut the sound from the wire into the headphones if i touch the wire that goes into the headphones it will cut out audio until i wiggle the wire around the sound will cue in but if i move the slightest it will cut out my friend said its a problem with the headphone jack the wire its self it fine we tested it on many other devises and there are no problems...

Chosen Solution Hello, i just bought a iphone 11 from a friend and the screen doesn’t turn on, when i try to use itunes it says it’s in dfu mode and when i try to repair the phone (with itunes) it says error 4014, i tried different cables, different computers (both pc and mac) and cleaned the lightning port but it did nothing. My friend said that the phone got dropped and never turned on since (the screen is looking perfect and it kinda turns on when i use itunes but it turn off again just after)....