Posts

Chosen Solution Hi, I broke my Xiaomi Redmi Note 4X 5.5 Inch screen. I have found this guide: Xiaomi Mi Note Screen Replacement I am not sure though, if I need both a screen and a digitizer. Despite the crack on the screen, the phone works fine it terms of functionality. Image is here, happy to also add a video if it helps: Any ideas/help? You only need the screen. But this process is really hard therefore you will probably end up breaking the digitalizer during the repair if you have not tried it before and then you will also have to replace the digitizer

Chosen Solution My camera buttons aren’t working. the menu button, fn, select button don’t work. the shutter release button works fine. the camera isn’t very responsive in manual modes. It works fine in Auto mode. hi Frank, i have the same problem with my Sony A7ii. Menu scrolling on its own and scroll wheel dont work, buttons dont work. Did you already FIX yours? Thank you bro :)

Chosen Solution This happened in a 21.5 mid 2011 iMac. I damaged the LCD thermal sensor socket in the logic board. Now the connector won’t stay in place. I know the missing thermal sensor should cause the fans to spin up (they do spin up after a while), but the screen is blank. I connected an external monitor and it works fine, so it doesn’t seem to be a graphics or logic board issue....

Chosen Solution From the pictures - I cant make out if I can add more RAM and replace the eMMC with an SSD. Is it possible with this unit - otherwise I will save my time by not opening it up. Update (07/18/2021) Thanks for the answer Jay. Time to gift this to someone. Hi, The short answer is no. The ram and eMMC storage are all hard mounted on the motherboard....

Chosen Solution I bought my Vive Pro used from a 3rd party seller. What I didn’t know was that the right screen was broken. The seller doesn’t take returns but I should be able to replace it with a new one. The biggest issue I’m having is finding out where I can get a replacement screen. Does anyone know where I might be able to get one? Hi, if you call the display “screen”, the two displays are same....

Chosen Solution Hello, I was trying to change my broken home button but when I tried to disconnect the flex cable that connects it to the metal plate I ripped the small port from the flex cable that is attached to the metal plate. Am I able to replace both the metal plate and the home button? I know that the touch id wont work but will the home button functionality work?...

Chosen Solution A friend of mine gave me an iPhone 6s after I broke mine. I have Verizon, and the phone is AT&T, but I have been wanting to switch to straight talk. Can I activate the AT&Tphone on straight talk, and keep my Verizon number? I know Verizon SIM won’t work on an AT&T phone, I just need to know if I’ll be able to switch the number. Verizon account is still active, and I have the SIM card....

Chosen Solution Здравствуйте. Имею на руках imac 21,5” (a1418) и macbook pro 2012 retina 15”(a1398). Решил imac прокачать чутка, заменить оперативу и ссд добавить. Уже купил переходник для intel 660p, но подумал, что лучше бы из макбука на 256 ссд перекинуть в аймак, а в аймаке на 512гб хотя бы поставить. Но если на аймаке 12+16 pin разъем, то на макбуке 7+17 pin. По отдельности есть переходники с обычных ссд и для аймака, и для макбука при чем в обе стороны....

Chosen Solution I have a mid 2011 27” imac with i7-2600 and am wondering if the apple board would support an i7-3xxx like later PC boards do. Sorry guy you’ve got the best CPU this system will support. The systems firmware (EFI) won’t let you install anything else and your socket is also a limiting factor.

Chosen Solution When I connect my iPod to the computer, it blinks 3 times and then stops. It does not show up in iTunes or Windows Explorer. So I cannot do work (add song, delete song) on the iPod. edennow007, try to reset it. Make sure you have your library backed up. Follow the instructions on here and see if it works. http://support.apple.com/kb/HT1238?viewl… Did I saw this right or what? But the guy above said that the iPod shuffle doesn’t show up on iTunes and windows explorer....

Chosen Solution My laptop wont turn on. If your Acer Aspire laptop won’t turn on, use the Acer Aspire 5253 Won’t Turn On problem page for possible causes and solutions. I will now kindly ask you to remove and reinsert the RAM DIMMS and the CMOS battery, I’m trying to isolate the problem here. You can follow this easy guide to get to those components. Take out the RAM, put it back in, make sure it’s secured properly....

Chosen Solution I removed all the adhesive around the outside of my iMac screen. Below the foam adhesive there also seems to be a line of black adhesive almost like electrical tape. Is it OK to remove this as well? It appears to be what the adhesive tape was sitting on. Don’t wanna replace the screen and find out that tape never should’ve been removed. Thank you so much for your responses....

Chosen Solution My Apple Watch Serie 2 keeps rebooting everytime I start using it. I’m unable to factory reset it either. Hello Alessandro, You broke a tape when opened or new battery is faulty. Open a watch, plug old battery and check again.

Chosen Solution My Asus Q534U has 12GB of memory. I’ve been experiencing memory errors in Windows 10. I ran the Windows Memory Test program and it indicates there is indeed some bad memory. Does not show any useful information (typical Microsoft). I opened the LT and pulled the 4GB memory and reran the test. It still shows a memory error, so I’m assuming the 4GB memory is OK. Where is the other 8GB of memory?...

Chosen Solution I recently purchased a new iMac 21.5" and got the magic mouse that came with it. After about a couple of weeks, the magic mouse is reporting a battery level of 63%. It has continuously been left on for the duration but i am not satisfied that the batteries have run so low in a couple of weeks, the keyboard still reports 100%. Should i turn the mouse off at night or is there something else I need to do?...

Chosen Solution Hey, i just bought a second hand “refurbished” macbook 7.1 13inch. it has a 250gb ssd and 8 gigs of ram in it. i got it refurbished and the battery just got replaced. coconutbattery confirmed that it was the first charging cycle(no idea if they put in a original one but not very likely). i have snow leopard running on it now. since i got it though it shuts down appruptly between 50% and 30% without a warning or whatever....

Chosen Solution I went on holidays, unplugged my Late 2011 13” Macbook pro from the wall, but forgot to shut it down. On return, plugging in the power adapter, green light comes on straight away. It will not charge the battery. Status of the charger is “Not charging” Report from “System Information” is below. Perhaps the most notable information is that it reports charge remaining as 0mAH, whilst simultaneously reporting Fully Charged: Yes....

Chosen Solution hi there I would like to know regarding format on my secondary hard drive on my MacBook Pro. At this moment my main SSD drive is on APFS format & my secondary drive I’m using 2TB Seagate Firecuda SSHD. Should I format the SSHD into APFS too like my main SSD drive or just leave it as it is MacOS Journaled? There’s NO OS/OSX/APPLICATIONS in that secondary drive 2TB Seagate Firecuda SSHD....

Chosen Solution My MBP a1226 has that not unusual problem of a screen that looks black, but I can still see very faint graphics on it. I must be upfront and say that before the screen went totally black, it started looking really weird with light/dark stripes of light at its bottom. I tried to attach a photo here, but it didn’t work… so please just take a look at the pics on this post because it’s exactly like my screen looked like before going totally black: LED Back light problems....

Chosen Solution Heading text bold text* Hit to insert anoth# Hit to insert another list item, and twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. ##)bold texter list item, and twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)...